Pressure-induced structural change of intermediate-range order in poly(4-methyl-1-pentene) melt.

نویسندگان

  • Ayano Chiba
  • Nobumasa Funamori
  • Kazuya Nakayama
  • Yasuo Ohishi
  • Stephen M Bennington
  • Sanjay Rastogi
  • Anuj Shukla
  • Kazuhiko Tsuji
  • Mikihito Takenaka
چکیده

High-pressure in situ x-ray diffraction and specific-volume measurements on isotactic poly(4-methyl-1-pentene) melt have uncovered abrupt changes in the pressure dependence of microscopic structure as well as that of macroscopic density. The first sharp diffraction peak of the polymer melt, which is related to the intermediate-range order and is explained as resulting from the correlations between main chains, is suppressed at pressures less than 1 kbar. These changes in intermediate-range order show similarities to those seen in liquid-liquid or amorphous-amorphous transitions in simpler small molecule based systems, suggesting that this kind of phenomenon may occur in a wide range of materials.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Microporous Membranes of Isotactic Poly(4-methyl-1-pentene) from a Melt-Extrusion Process: (I) Effects of Resin Variables and Extrusion Conditions

A study utilizing isotactic poly(4-methyl-1-pentene) (PMP) was undertaken to investigate a three stage process (melt-extrusion/annealing/uniaxial-stretching) (MEAUS) employed to produce microporous films. The results of this study will be reported in the course of two papers. In this first part, three PMP resins were melt-extruded into tubular films (blowup ratio; BUR = 1), where the resins eac...

متن کامل

Gas Selective Properties of Poly(4-Methyl-1-Pentene) Modifed by Gas Phase Fluorination

Fluorine-containing polymers have a number of valuable physical and chemical properties, such as high chemical and heat resistance, high mechanical strength and highly selective gas separation characteristics. One of the ways to produce fluoropolymer membranes is through surface fluorination. The modifcation of commercial polymers with membrane properties, poly(4-methyl-1...

متن کامل

Microporous Membranes of Isotactic Poly(4-methyl-1-pentene) from a Melt-Extrusion Process: (II) Effects of Thermal Annealing and Stretching on Porosity

A two part study utilizing isotactic poly(4 -methyl-1-pentene) (PMP) was undertaken to investigate a three stage process (melt-extrusion/annealing/uniaxial-stretching) (MEAUS) to produce microporous films. In this report, the thermal annealing (second stage) and subsequent uniaxial-stretching (third stage) results of selected PMP films from three resins, labeled A, B & C, are discussed. From se...

متن کامل

Friction Stir Welding؛ Material Flow؛ Heat Generation؛ Thermal Simulation؛ Poly methyl methacrylate (PMMA)

In this study, the effects of linear and rotational speed of the friction stir welding tool was investigated on the heat generation and distribution at surface and inside of workpiece, material flow and geometry of the welding area of poly methyl methacrylate (PMMA) workpiece. The commercial CFD Fluent 6.4 software was used to simulation of the process with computational fluid dynamic technique...

متن کامل

Nuclear Radiations Induced Change in Thermal and Structural Properties of 2-}[4-(2-HydroxyBenzylideneamino) Phenylimino] Methyl{ Phenol (PAM) Schiff Base

The variation of thermal and structural properties of 2-{[4-(2-hydroxybenzylideneamino) phenylimino]methyl}phenol (PAM)Schiff base were studied using differential scanning calorimetry (DSC) and powder X-ray diffraction techniques before and after fast neutron (1.050 and 1.740kGy), beta (11.01Gy) and gamma (453.0Gy) irradiations. Under fast neutron irradiation, the melting and decomposition enth...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review. E, Statistical, nonlinear, and soft matter physics

دوره 85 2 Pt 1  شماره 

صفحات  -

تاریخ انتشار 2012