Local Active Sound Control Using the Remote Mi- Crophone Technique and Head-tracking for Tonal and Broadband Noise Sources
نویسندگان
چکیده
Local active sound control can be combined with the remote microphone technique and headtracking for the case when direct measurement of the error signals at a listener’s ears is not possible and the position of the listener’s head is continuously changing. This paper presents the performance of the combined active control system when it is applied to reduce either tonal or broadband random noise. First of all, effects of the combined system were experimentally investigated when periodic noise from a single primary source was adaptively controlled in real time. By directly applying observation filters and acoustical responses in the frequency domain, it was shown that active control of tonal noise can be effectively improved by the remote microphone technique and head-tracking. In addition, the ability of the combined active control system to control stationary random broadband noise was investigated. However, in this case, the causality of the observation filter must be considered due to the unpredictability of random noise. Therefore, the causally constrained remote microphone technique and the corresponding broadband active noise control system were studied.
منابع مشابه
Numerical study on the acoustic field of a centrifugal fan and the tonal noise sources
The widespread use of squirrel cage fans, especially in ventilation and home and industrial environments, has led to the formation of many research efforts to improve performance and reduce the sound produced by this type of fan. In the literature, the most important factor in generating sound in this category of fans is the confrontation between the rotor exit flow and the volute of the fan. I...
متن کاملActive noise control at a moving virtual microphone using the SOTDF moving virtual sensing method
Traditional local active noise control systems minimise the measured acoustic sound pressure to generate a zone of quiet at a physical error sensor. The resulting zone of quiet is generally limited in size and as such, placement of a physical error sensor at the location of desired attenuation is required, which is often inconvenient. Virtual acoustic sensors can be used to project the zone of ...
متن کاملکنترل صدای پمپ های آب در یک نیروگاه حرارتی
Background and aims: The power plants, including important industry of the country in which a large number of noise sources which workers are exposed with harmful levels occupational noise. The aim of this study was designing enclosures to noise control in the feed water pumps in a power plant. Methods: This cross-sectional study and their Interventional plants were done on the ground floor ...
متن کاملActive Audition for Humanoid
In this paper, we present an active audition system for humanoid robot “SIG the humanoid”. The audition system of the highly intelligent humanoid requires localization of sound sources and identification of meanings of the sound in the auditory scene. The active audition reported in this paper focuses on improved sound source tracking by integrating audition, vision, and motor movements. Given ...
متن کاملEffects of a Passive Enclosure on an Active Noise Control System in Free Field
A kind of noise is dominated by broadband noise with low frequency tonal components. To achieve noise control on whole frequency band, it is necessary to implement hybrid control technique combining passive control and active control. There are three methods to combine passive control and active control, including active control in passive enclosures, active control outside passive enclosure an...
متن کامل