The Influence of Base Metal (M) Oxidation State in Au-M-O/TiO2 Systems on Their Catalytic Activity in Carbon Monoxide Oxidation
نویسندگان
چکیده
Base metal promoted gold/titania catalysts were synthesized, characterized and tested in CO oxidation reaction. Catalysts containing dopant metals in higher oxidation states exhibited higher activity than catalysts containing dopants in reduced states. The activity of fresh catalysts promoted by Cu, Fe and Ni was similar to the unpromoted one, but treatment in reducing and oxidizing atmospheres revealed the supremacy of the copper promoted catalyst. The sequential deposition method proved to be better than the co-deposition—precipitation method. An attempt to explain these differences using XPS, FTIR and H2 TPR was performed.
منابع مشابه
Catalytic Oxidation of Carbon Monoxide by Cobalt Oxide Catalysts Supported on Oxidized-MWCNT
Cobalt oxide catalysts supported on oxidized multi-walled carbon nanotubes (MWCNT) for the low-temperature catalytic oxidation of carbon monoxide were prepared by an impregnation-ultrasound method. These catalysts were characterized by N2 adsorption/desorption, TEM, XRD, Raman, and H2-TPR methods. The XRD and Raman results indicated that the phase of the synthesized cobalt...
متن کاملInfluence of TiO2 bulk defects on the CO adsorption and CO oxidation on Au/TiO2 – Electronic metal-support interactions (EMSI) in supported Au catalysts
Electronic metal-support interactions (EMSI) are demonstrated to severely affect the CO oxidation activity and the CO adsorption properties of Au/TiO2 catalysts. Bulk oxygen vacancies, generated by a strongly reductive pre-treatment of Au/TiO2 at elevated temperature in 10% CO/N2, significantly lower the catalytic activity for CO oxidation at 80°C. With time on stream, the activity slowly incre...
متن کاملDesign of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols
We explore electro-catalytic properties of a system consisting of platinum and palladium nanoparticles dispersed over a nanotubular self-organized TiO2 matrix. These electrodes prepared by electroess and microemulsion of palladium and palladium nanoparticles on to TiO2 nanotubes, respectively. Titanium oxide nanotubes were fabricated by anodizing titanium foil in ethylene glycol (EG) fluoride-c...
متن کاملMulti-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media
Palladium nanoparticles supported on multi-walled carbon nanotubes (Pd/MWCNTs) have been synthesized using a modified polyol reduction method and its performance in methanol oxidation reactions has evaluated. The morphology of palladium on MWCNTs was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The catalytic performance of synthesized catalyst ...
متن کاملStructural, Magnetic and Catalytic Properties of Non-Stoichiometric Lanthanum Ferrite Nano-Perovskites in Carbon Monoxide Oxidation
Perovskite-type oxides of LaFe(1+x)O(3+δ) (x = 0.0, 0.2, 0.5 and 0.7) were synthesized by citrate sol–gel methodto ensure the formation of nanosized perovskites. The physicochemical properties of these LaFe(1+x)O(3+δ)materials were characterized by thermal gravimetric/differential analyses, Fourier transform infraredspectroscopy, X-ray powder diffraction, scanning electron and...
متن کامل