Three-level stencil alignment fabrication of a high-k gate stack organic thin film transistor

Please cite this article in press as: N.V. Cvetkov In this work a high-k double-gate pentacene field-effect transistor architecture is presented. The devices are fabricated on a flexible polyimide substrate by three aligned levels of stencil lithography combined with standard photolithography. ALD-deposited high-k HfO2 and parylene D device passivation, together with Pt top-gate deposition provide very good electrostatic control of the channel, showing low leakage current and improved subthreshold. The ION/IOFF ratio is of the order of 10 and the IOFF lower than 0.1 pA/lm. We also report a comparison of the normal, FET-like (VD < 0) and reverse, diode-like (VD > 0) modes of the p-OFET. We find a higher current drive in the reverse diode-like mode compared to normal FET-like mode. The reverse mode has clearly defined OFF and ON states versus the drain voltage and non-saturated output characteristics, which makes it suitable for the use in RF and analog applications of OFETs. 2011 Elsevier B.V. All rights reserved.