Low Power Noise Tolerant Latch Design for Adder Application

نویسندگان

  • R.ADITHYA
  • M.JAGADEESWARI
چکیده

R.ADITHYA ABSTRACT In this paper an ultra low power and probabilistic based noise tolerant latch is proposed based on Markov Random Field (MRF) theory. The absorption laws and H tree logic combination techniques are used to reduce the circuit complexity of MRF noise tolerant latch. The cross coupled latching mechanism is used at the output of the MRF latch inorder to preserve the noise tolerant capability of MRF latch. The proposed latch is faster than the latches presented in the literature and provides low power and high noise immunity. Hence we can achieve good trade off in terms of performance, robustness and cost. The latches are evaluated in 180nm CMOS technology. The results obtained show that the proposed latch consumes low power and highly noise tolerant. Finally the proposed latch is applied in transmission gate based full adder circuit. In 180nm technology the proposed adder can operate reliably with superior noise tolerance and low power compared to conventional latch based full adder circuit.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Hardware-efficient common-feedback Markov-random-field probabilistic-based noise-tolerant VLSI circuits

As the size of CMOS devices is scaled down to lower the power consumption and space occupied on the chip to the nano-scale, unfortunately, noise is not reduced accordingly. As a result, interference due to noise can significantly affect circuit performance and operation. Since noises are random and dynamic in nature, probabilistic noise-tolerant approaches are more desirable to handle this prob...

متن کامل

Fault-tolerant adder design in quantum-dot cellular automata

Quantum-dot cellular automata (QCA) are an emerging technology and a possible alternative for faster speed, smaller size, and low power consumption than semiconductor transistor based technologies. Previously, adder designs based on conventional designs were examined for implementation with QCA technology. This paper utilizes the QCA characteristics to design a fault-tolerant adder that is more...

متن کامل

Fault-tolerant adder design in quantum-dot cellular automata

Quantum-dot cellular automata (QCA) are an emerging technology and a possible alternative for faster speed, smaller size, and low power consumption than semiconductor transistor based technologies. Previously, adder designs based on conventional designs were examined for implementation with QCA technology. This paper utilizes the QCA characteristics to design a fault-tolerant adder that is more...

متن کامل

Low-Power Adder Design for Nano-Scale CMOS

A fast low-power 1-bit full adder circuit suitable for nano-scale CMOS implementation is presented. Out of the three modules in a common full-adder circuit, we have replaced one with a new design, and optimized another one, all with the goal to reduce the static power consumption. The design has been simulated and evaluated using the 65 nm PTM models.

متن کامل

Design of Approximate Adder for Error Tolerant Application

the probability of errors in the present VLSI technology is very high and it is increasing with technology scaling. Removing all errors is very expensive task and is not required for certain applications. There are certain application where the approximate result is acceptable e.g. image processing and video processing. For these applications Error Tolerant Adder (ETA) is proposed which provide...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014