Influence of Air Content Entrained in Fluid of a Vane Pump with Double Effect Operating Parameters
نویسندگان
چکیده
Preliminary notes In developing the vane pumps the fundamental basis is experimental research and mathematical modelling of nonstationary hydraulic processes inside the pump, in thrust space and suction and thrust pipeline. By means of experimental research and results of mathematical modelling and software package KRILP, it is possible to determine the parameters of operating processes of vane pumps precisely enough. This research examines the idealized and actual flow ripple of a high-pressure vane within vane type pump. For the idealized case, a "perfect" pump is examined in which the leakage is considered to be zero and the fluid is considered to be incompressible. Based upon these assumptions, expressions describing the characteristics of the idealized flow-ripple are derived. Next, the actual flow-ripple of the pump is examined by considering the fluid compressibility and for computing these results a numerical program is used. From the idealized analysis it is shown that the idealized flow-ripple is determined by geometrical flow property.
منابع مشابه
Performance Analysis of a Variable Geometry Turbocharger Using Mean Line Method
Turbocharging an engine boosts its power by increasing the amount of input air. This task is accomplished by using the exhaust gas to power a turbine which is engaged with a compressor. The Variable Geometry Turbocharger, VGT is a unique turbocharger that the diffuser vane angle can be changed over a wide range of positions. The mathematics of turbomachinery flow analysis is intensive and uses ...
متن کاملSimulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection
In this paper, a simulation-based method is proposed for optimal placement of vibration sensors for the purpose of fault detection in a centrifugal pump. The centrifugal pump is modeled to investigate the effect of vane tip fault on fluid flow patterns numerically. Pressure pulsations are investigated at different locations at the inner surface of the pump before and after the presence of the f...
متن کاملHeat transfer enhancement due to air bubble injection into a horizontal double pipe heat exchanger
If an air flow is injected into a liquid fluid, many ambulant air bubbles are formed inside the fluid. Air bubbles move inside the liquid fluid because of the buoyancy force, and the mobility of these air bubbles makes sizable commixture and turbulence inside the fluid. This mechanism was employed to enhance the heat transfer rate of a horizontal double pipe heat exchanger in this paper. Howeve...
متن کاملتأثیر نوع سیال عامل بر عملکرد سیستم تبرید اجکتوری
In this paper, the performance of an ejector cooling system and the effect of the following different working fluids such as water, ammonia, R134a, R141b, R12, R600 and R245fa are described and the effects of cycle parameters on the consumed heat and work and COP are studied. This cycle with the working fluid R141b has the least COP while the working fluid R₁₂ in comparison with the other worki...
متن کاملInfluence of operating parameters on the Apatite flotation kinetics
AbstractThe purpose of this study was to investigate the controllable operating parameters influence, including pH, solid content, collector, co-collector, and depressant dose, and conditioning time, on apatite flotation kinetics. Four first order flotation kinetic models are tested on batch flotation time-recovery profiles. The results of batch flotation tests and the fitting of first-order ki...
متن کامل