Properties of Ir 4 Clusters in the Gas Phase and on Oxide Substrates THÈSE
نویسنده
چکیده
Results of a theoretical study on the properties of Ir4 clusters in the gas–phase and on oxide surfaces are presented. The work is based on density functional theory (DFT) within the generalized gradient approximation (GGA) and ultrasoft pseudopotentials. Properties of a small particle such as Ir4 cluster are entirely determined by its geometry. The already known result that the most stable form of Ir4 in the gas–phase is the square structure which is significantly more stable than the butterfly and tetrahedron is confirmed. This result is in contradiction with experiments which indicate that the oxide supported Ir4 adopts a tetrahedral configuration. It is shown in this thesis that the chemical environment has a strong influence on the relative stability of Ir4 clusters. On MgO(100) surface, the square isomer remains the most stable Ir4 structure, well separated in energy from the other two. Moreover, the tetrahedron is heavily distorted by the interaction with the surface oxygen. Presence of point defects (neutral and charged O vacancies) affects the energy ordering making tetrahedron and square very close in energy, but the structural distortion of the tetrahedron is even bigger and the predicted data do not correspond to experiments. On TiO2(110) the tetrahedron and square structures become degenerate and the butterfly becomes the least stable isomer. Moreover, structural distortions are very small, in agreement with experimental data. It is shown that the TiO2 surface influences the relative stability of the three isomers through a particularly strong electrostatic field. Interactions of Ir4 with H, C and O atoms as well as with CO molecules have been studied. Adsorption of a single C atom strongly influences the relative stability of the three isomers. Upon C adsorption, the butterfly becomes the most stable gas–phase isomer while on both surfaces the tetrahedron is the most probable structure. Adsorption of a single H or O atom does not produce the same effect. The interaction with CO molecules is also important given the experimental procedure used for producing supported Ir4 clusters. It is shown that on MgO(100), CO dissociation is as probable as the competing process CO desorption justifying the presence of carbon adatoms on Ir4 clusters which brings theoretical predictions in better agreement with experimental data.
منابع مشابه
A Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates
The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...
متن کاملFabrication, characterization and investigation of gas sensing properties of MoO3 thin films
In this research, molybdenum oxide (α-MoO3) thin films were coated on glass substrates using spray pyrolysis technique. 0.05 M ammonium heptamolybdate tetrahydrate was used as precursor and deionized water as solvent. The effects of carrier gas pressure, during the spraying of the solution, on the structural, optical, morphological and gas sensing properties of thin films were studied. X-ray di...
متن کاملSynthesis of Zinc Oxide Nanostructured Thin Film by Sol- Gel Method and Evaluation of Gas Sensing Properties
Ethanol (C2H6O) sensitivity of zinc oxide (ZnO) thin film has been studied in present work. Semiconductor thin films of zinc oxide (ZnO) were deposited onto alkali-free glass substrates by the sol–gel method and dip-coating technique. The ZnO sol was synthesized by dissolving zinc acetate dehydrate in ethanol, and then adding Tetra ethanol-amine. The as-coated films were preheated at 150 ºC fo...
متن کاملEnhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates
Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...
متن کاملImproving Gas Sensing Properties of Tin Oxide Nanowires Palladium-Coated Using a Low Cost Technique
Thin films of SnO2 nanowires were successfully prepared by using chemical vapor deposition (CVD) process on quartz substrates. Afterwards, a thin layer of palladium (Pd) as a catalyst was coated on top of nanowires. For the deposition of Pd, a simple and low cost technique of spray pyrolysis was employed, which caused an intensive enhancement on the sensing response of fabricated sensors...
متن کامل