An Integrated 80-V, 45-W Class-D Power Amplifier with Optimal-Efficiency-Tracking Switching Frequency Regulation
نویسندگان
چکیده
Piezoelectric actuators are widely used in smart materials for vibration and noise control, precision actuators, etc. [1]. These actuators are largely capacitive and the reactive power applied on them can go to several tens of Watts. High-voltage, high-power class-D amplifiers [2-5] are ideal drivers for such loads, because of their high power efficiency. Preferably, efficiency should be high both at maximum power and at average output power. Obtaining high power efficiency over the full output power range of a class D amplifier is the main focus of this work.
منابع مشابه
A Hysteretic Two-phase Supply Modulator for Envelope Tracking RF Power Amplifiers
In this paper a two-phase supply modulator suitable for envelope tracking power amplifier is presented. The designed supply modulator has the linear assisted switching architecture. Two-phase architecture is used in order to reduce the output switching ripples. The proposed architecture uses hysteretic control instead of pulse width modulation (PWM) which significantly reduces the circuit compl...
متن کاملHIGH-VOLTAGE CLASS-D POWER AMPLIFIERS: DESIGN AND OPTIMIZATION Haifeng Ma HIGH-VOLTAGE CLASS-D POWER AMPLIFIERS: DESIGN AND OPTIMIZATION
i ABSTRACT Nowadays transducers are ubiquitous as interfaces between the increasingly digital world and the real physical world. The same holds for the power amplifiers driving them. This thesis focuses on the design and optimization of high-voltage class-D amplifiers, which are used for driving capacitive piezoelectric actuator loads in active vibration/noise control applications. The main obj...
متن کاملDesign of X Band High Power Amplifier MMIC Based on AlGaN/GaN HEMT
In this paper, we have presented an X band high power amplifier based on MMIC (Monolithic Microwave Integrated Circuit) technology for satellite remote sensing systems. We have used GaN HEMT process with 500 nm gate length technology with VD= 40 V and VG= -2 V in class E structure. The proposed two-stage power amplifier provides 25 dB power gain with maximum output power of 49.3 dBm at 10 GHz. ...
متن کاملHigh Frequency Current Mode Class-D Amplifiers With High Power and Efficiency
High Frequency Current Mode Class-D Amplifiers With High Output Power and Efficiency By Anthony Lawrence Long A 13 watt Current Mode Class-D (CMCD) with 60% efficiency is presented. This amplifier is the highest power switch mode microwave power amplifier reported to date. The CMCD architecture is an improvement over the Voltage Mode Class-D in that the parasitic reactance in the active device ...
متن کاملA Novel High Frequency, High-Efficiency, Differential Class-E Power Amplifier in 0.18μm CMOS
This paper presents the design of a high efficiency, low THD, 5.7GHz fully differential power amplifier for wireless communications in a standard 0.18μm CMOS technology. The power amplifier employs a fully differential class-E topology to achieve high power efficiency by exploiting its soft-switching property. In order to achieve high operating frequency, an injectionlocked oscillator is utiliz...
متن کامل