Multi-kilohertz repetition rate Ti:sapphire amplifier based on down-chirped pulse amplification.
نویسندگان
چکیده
We present a novel ultrafast multipass laser amplifier design optimized for sub-millijoule output energy and capable of being operated at repetition rates exceeding 40 kHz. This ti:sapphire based system makes use of a grism based stretcher, a cryogenically cooled ti:sapphire crystal and an astigmatically compensated multipass amplifier design that allows for pumping with significantly lower pump pulse energies than has been demonstrated to date. We also make use of the downchirped pulse amplification scheme to minimize loss in the pulse compression process. Preliminary experiments demonstrate an output pulse energy of 290 muJ at 10 kHz and 270 muJ at 15 kHz with a pulse duration of 36 fs.
منابع مشابه
Multi-microjoule, MHz repetition rate Ti:sapphire ultrafast regenerative amplifier system.
We demonstrate a cryogenically cooled Ti:sapphire ultrafast regenerative amplifier laser system producing >20 μJ energies at 50 kHz, >12 μJ at 200 kHz and >3.5 μJ at 1MHz with repetition rates continuously tunable from 50 kHz up to 1.7 MHz in a footprint of only 60x180 cm². This laser uses down-chirped pulse amplification employing a grism stretcher and a glass-block compressor, achieving sub-6...
متن کاملGeneration of 0.2-TW 5.5-fs optical pulses at 1 kHz using a differentially pumped hollow-fiber chirped-mirror compressor
Optical pulses with 1.1-mJ energy and 5.5-fs duration have been generated at 1-kHz repetition rate from a chirped pulse amplification Ti:Sapphire laser incorporating a differentially pumped hollow-fiber chirped-mirror compressor. The effects of self-focusing and multi-photon ionization during the beam propagation were minimized by differentially pumping the hollow fiber filled with neon. The sp...
متن کاملA compact 355TW femtosecod Ti:sapphire laser facility and trend to high contrast ratio
A Ti:sapphire laser facility is established based on the chirped pulse amplification technology. For the first time we generate laser peak power of multi-100TW with three stages of amplifiers. In the final amplifier a 100J frequency-doubled Nd:glass laser is used as the pump source. To suppress the parasitic lasing (PL), we design the Ti:sapphire crystal with V groove cutting shape and use poly...
متن کاملHigh pulse energy 2 µm femtosecond fiber laser.
In the paper, a 2 µm high energy fs fiber laser and amplification system is presented based on Tm doped fibers. The seed laser was designed to generate pulse train at 2024 nm at a repetition rate of 2.5 MHz. An AOM was used as a pulse picker to further lower the repetition rate down to 100 kHz. Two-stage fiber pre-amplifiers and a high energy large mode area (LMA) fiber amplifier were used to b...
متن کاملDistributed nonlinear fiber chirped-pulse amplifier system.
A two-stage fiber-based femtosecond amplification system is presented, based on chirped-pulse amplification in highly nonlinear regime. The amount of self-phase modulation is separately adjusted in each stage selecting the proper stretching ratio in order to compensate gain narrowing. Analytical design rules are validated using numerical simulations. Our experimental implementation leads to the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics express
دوره 14 20 شماره
صفحات -
تاریخ انتشار 2006