Influence of annealing effects on polyaniline for good microstructural modification
نویسندگان
چکیده
H(2)SO(4) doped polyaniline (PANI) has synthesized by chemical oxidation method. The prepared Polyaniline were annealed at 150 °C, 200 °C and 250 °C for 30 min in vacuum. Crystal size, percentage of crystallinity, total percentage of crystallinity properties of untreated and heat treated PANI samples were studied by using X-ray diffraction pattern. The molecular structure of untreated and heat treated samples were examined by using Fourier transform infrared spectrophotometer. UV study shows π-π* transition of untreated and heat treated of polyaniline were found at 328 and 636 nm. The peak at 636 nm reveals the extension of conjugated polymer. Thermal properties of untreated and heat treated PANI sample measured by using thermo gravimetric analysis and differential scanning calorimetric spectroscopy.
منابع مشابه
The Effect of Intercritical Annealing Time on the Microstructures and Mechanical Properties of an Ultrafine Grained Dual Phase Steel Containing Niobium
An ultrafine grained dual phase (UFG DP) steel containing niobium was produced by a new route utilizing simple cold-rolling and subsequent intercritical annealing of ferrite/martensite duplex starting structures. The effects of intercritical holding time on the microstructural evolutions and mechanical properties were studied. The results showed that increasing intercritical holding time enhnac...
متن کاملThe Influence of Homogenization and Solution Annealing Process on the Microstructure and Mechanical Properties of 1.4470 Ferritic-austenitic Stainless Steel
In the present research, the effect of the homogenization process and annealing temperature were investigated for the 1.4470 ferritic-austenitic stainless steel in the as-cast condition. In this regard, microstructural evolutions, hardness, and impact energy of the steel was evaluated with different heat treatment conditions. The results show that the minimum volume fraction of austenite phase ...
متن کاملMicrostructural Evolution and Mechanical Properties of Ultrafine/nano Structured AISI 321 Stainless Steel Produced by Thermo-mechanical Processing
The mechanical properties and microstructural developments of 321 stainless steel during thermomechanical process were investigated. The repetitive cold rolling and subsequent annealing were conducted to achieve nanocrystalline structure in an AISI 321 stainless steel. Heavily cold rolling at −20°C was conducted to form martensite in metastable austenitic steel. The process was followed by anne...
متن کاملModification Conductivity of Emeraldine Base form of Polyaniline-Cobalt Sulphate Nanocomposite Synthesis by Chemical Method
The structural and electrical properties of polyaniline-cobalt sulphate nanocomposite prepared by chemical method.Polyaniline-cobalt sulphate nanocomposites were synthesized by the cobalt sulphate and ammonium persulphate and aniline.This paper reports on chemical technique using for synthesis of cobalt nanoparticles in the composite bridge is aniline. Electrical conductivity of polyaniline wit...
متن کاملModification Conductivity of Emeraldine Base form of Polyaniline-Cobalt Sulphate Nanocomposite Synthesis by Chemical Method
The structural and electrical properties of polyaniline-cobalt sulphate nanocomposite prepared by chemical method.Polyaniline-cobalt sulphate nanocomposites were synthesized by the cobalt sulphate and ammonium persulphate and aniline.This paper reports on chemical technique using for synthesis of cobalt nanoparticles in the composite bridge is aniline. Electrical conductivity of polyaniline wit...
متن کامل