Comparative pulmonary toxicity of 6 abrasive blasting agents.

نویسندگان

  • A F Hubbs
  • N S Minhas
  • W Jones
  • M Greskevitch
  • L A Battelli
  • D W Porter
  • W T Goldsmith
  • D Frazer
  • D P Landsittel
  • J Y Ma
  • M Barger
  • K Hill
  • D Schwegler-Berry
  • V A Robinson
  • V Castranova
چکیده

Inhalation of silica dust is associated with pulmonary fibrosis. Therefore, substitute abrasive materials have been suggested for use in abrasive blasting operations. To date, toxicological evaluation of most substitute abrasives has been incomplete. Therefore, the objective of this study was to compare the pulmonary toxicity of a set of substitute abrasives (garnet, staurolite, coal slag, specular hematite, and treated sand) to that of blasting sand. Rats were exposed to blasting sand or an abrasive substitute by intratracheal instillation and pulmonary responses to exposure were monitored 4 weeks postexposure. Pulmonary damage was monitored as lactate dehydrogenase (LDH) in the acellular lavage fluid. Pulmonary inflammation was evaluated from the yield of polymorphonuclear leukocytes (PMN) obtained by bronchoalveolar lavage. The activity of alveolar macrophages was determined by measuring zymosan-stimulated chemiluminescence. Blasting sand caused lung damage and showed histologic evidence for inflammation and fibrosis. Garnet, staurolite, and treated sand exhibited toxicity and inflammation that were similar to blasting sand, while coal slag caused greater pulmonary damage and inflammation than blasting sand. In contrast, specular hematite did not significantly elevate LDH or PMN levels and did not stimulate macrophage activity 4 weeks postexposure.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Abrasive Selection: Performance and Quality Considerations

Hardest 10. Diamond he selection of abrasive media for blast cleaning steel is based primarily on two broad objectives, quality and economics. Quality is defined in terms of appearance after cleaning (SSPC-SP 7, 6, 10, and 5 ) , profile depth and contour, and chemical cleanliness. The economics of an abrasive is determined by its initial cost and by the production rate that can be achieved when...

متن کامل

Using Glass as a Blasting Abrasive

Issue: Processed recycled glass has been sold as an abrasive blasting medium under several brand names in different parts of the United States. However, limited public information is available regarding the performance of finely sized crushed glass in abrasive applications because manufacturers have developed their own proprietary data. Historically, the predominant material used for abrasive b...

متن کامل

Best Practices in Glass Recycling: Using Glass as a Blasting Abrasive

Issue: Processed recycled glass has been sold as an abrasive blasting medium under several brand names in different parts of the United States. However, limited public information is available regarding the performance of finely sized crushed glass in abrasive applications because manufacturers have developed their own proprietary data. Historically, the predominant material used for abrasive b...

متن کامل

The Effects of Shot and Grit Blasting Process Parameters on Steel Pipes Coating Adhesion

Adhesion strength of exterior or interior coating of steel pipes is too important. Increasing of coating adhesion on surfaces can increase the life time of coating, safety factor of transmitting line pipe and decreasing the rate of corrosion and costs. Preparation of steel pipe surfaces before doing the coating process is done by shot and grit blasting. This is a mechanical way to do it. Some e...

متن کامل

The effect of abrasive blasting on the strength of a joint between dental porcelain and metal base.

This paper presents the effect of selected parameters of abrasive blasting on the strength of a joint between dental porcelain and metal base. Experiments were conducted for different grain sizes of abrasive material and different blasting angles, with a constant blasting pressure. InLine dental porcelain was fused on samples of cobalt-chromium alloy following abrasive blasting; they were subse...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Toxicological sciences : an official journal of the Society of Toxicology

دوره 61 1  شماره 

صفحات  -

تاریخ انتشار 2001