Impact of Operators' Performance on the Reliability of Cyber-Physical Power Distribution Systems

نویسندگان

  • Michel Bessani
  • Rodrigo Zempulski Fanucchi
  • Alexandre C. C. Delbem
  • Carlos Dias Maciel
چکیده

Cyber-Physical Systems are the result of integrating information and communication technologies into physical systems. One particular case are Cyber-Physical Power Systems (CPPS), which use communication technologies to perform real-time monitoring and operation. These kinds of systems have become more complex, impacting on the systems’ characteristics, such as their reliability. In addition, it is already known that in terms of the reliability of Cyber-Physical Power Distribution Systems (CPPDS), the failures of the communication network are just as relevant as the electrical network failures. However, some of the operators’ performances, such as response time and decision quality, during CPPDS contingencies have not been investigated yet. In this paper, we introduce a model to the operator response time, present a Sequential Monte Carlo Simulation methodology that incorporates the response time in CPPDS reliability indices estimation, and evaluate the impact of the operator response time in reliability indices. Our method is tested on a CPPDS using different values for the average response time of operators. The results show that the response time of the operators affects the reliability indices that are related to the durations of the failure, indicating that a fast decision directly contributes to the system performance. We conclude that the improvement of CPPDS reliability is not only dependent on the electric and communication components, but also dependent on operators’ performance.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Novel Method for Implementing of Time-of-use to Improve the Performance of Electric Distribution Systems: A Case Study

Increased electric energy consumption in recent years, associated economic problems, reduced reliability and increased power losses in electric networks. One of the main solutions in smart grids to overcome the mentioned problems is demand response programs. In demand response programs, operators apply time-varying tariffs to consumers, and convince them to change their consumption pattern. Amo...

متن کامل

Reliability Assessment of Distribution Systems in Presence of Microgrids Considering Uncertainty in Generation and Load Demand

The microgrid concept provides attractive solutions for reliability enhancement of power distribution systems. Normally, microgrids contain renewable-energy-based Distributed Generation (DG) units, which their output power varies with different environmental conditions. In addition, load demand usually changes with factors such as hourly and seasonal customer activities. Hence, these issues hav...

متن کامل

Resilient Configuration of Distribution System versus False Data Injection Attacks Against State Estimation

State estimation is used in power systems to estimate grid variables based on meter measurements. Unfortunately, power grids are vulnerable to cyber-attacks. Reducing cyber-attacks against state estimation is necessary to ensure power system safe and reliable operation. False data injection (FDI) is a type of cyber-attack that tampers with measurements. This paper proposes network reconfigurati...

متن کامل

Investigating and Improving the Effect of Distributed Generation on Reliability in Wind Systems by ARMA Method

The increasing development of the use of new energies has led to the widespread use of power electronics, so that electronic power converters play an important role in extracting power from renewable sources. Power electronics can convert raw energy produced from new energy into the desired power with controlled current, voltage and frequency to be used in the power grid. Restructuring of power...

متن کامل

Sensitivity Assessment of Lightning Protection Device Aging Effect on Distribution Substation Insulation

 Insufficient electrical endurance of equipment and insulation failure against overvoltage is one of the most effective reasons for failure the power line. Lightening, switching or other disruptive parameters can cause line outage or distribution substation failure. There are different devices used to improve the safety, reliability, and power quality of the system. Surge arresters are one of t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • CoRR

دوره abs/1603.07775  شماره 

صفحات  -

تاریخ انتشار 2016