The Self-Propelled Model of a Boat, Based on the Wave Thrust
نویسنده
چکیده
We attempted investigate a boat model, based on the conversion of energy of surface wave into a sequence of unidirectional pulses of jet spurts, in other words model of the boat, which is thrusting by the waves field on water surface. These pulses are forming some average reactive stream from the output nozzle on the stern of boat. The suggested model provides the conversion of its oscillatory motions (both pitching and rolling) into a jet flow. This becomes possible due to special construction of the boat and due to several details, sensitive to the local wave field. The boat model presents the uniflow jet engine without slow conversions of mechanical energy into intermediate forms and without any external sources of energy (besides surface waves). Motion of boat is characterized by fast jerks and average onward velocity, which exceeds the velocities of liquid particles in the wave. Keywords—Flat-bottomed boat, Underwater wing, Input and output nozzles, Wave thrust, Conversion of wave into a jet stream, Oscillatory motion and onward motion, Squid-like pump, Hatch-like pump, The thrust due to lifting float, The thrust due to radiation reaction.
منابع مشابه
Favorable Plug Shape of an Aerospike Nozzle in Design, Over and Under Expansion Conditions
The influence of the plug shape on the performance of an aerospike nozzle thrust force is studied in different back pressure conditions. To generate smooth plug contours, Cubic B-Spline technique is employed. In the current research, basis functions are obtained using Deboor’s relation. The flow field around the aerospike nozzle is investigated implementing various shapes and the best of the ge...
متن کاملNumerical investigation of a fleet of self-propelled AUVs
This paper investigates the influence of the propeller on the drag of twin self-propelled AUVs, firstly, to examine the fleet performance for various propulsive conditions of leading and following AUV and, secondly, to study the parametric influence of transverse separations and longitudinal offsets on the fleet’s drag. A series of CFD RANS-SST simulations have been performed at the Reynolds Nu...
متن کاملDevelopment of Linear Vernier Hybrid Permanent Magnet Machine for Wave Energy Converter
Today, due to the limited supply and rapid consumption of fossil fuels, transitioning towards renewable energy supplies has become more important than ever.. The purpose of this paper is to present a new linear permanent magnet vernier machine structure which is designed to capture wave energy and improve the performance of the prototype vernier machine. By halving the proposed vernier machine,...
متن کاملMulti-level Thrust Ripples Minimization of Linear Flux Switching Motors With Segmented Secondary by Combined Genetic Algorithm and Response Surface Methodology
Linear flux switching motors with simple passive segmented secondary, referred as Segmented Secondary Linear Flux Switching Motors (SSLFSMs), have low cost secondary and therefore are applicable to transportation systems like Maglev. However, it is shown that the SSLFSMs suffer from high thrust ripples. In this paper, minimizing SSLFSM thrust ripples besides maximizing its developed thrust are ...
متن کاملIn-Trim Flight Investigations of a Conceptual Fluidic Thrust-Vectored Unmanned Tail-Sitter Aircraft
The feasibility of using a stand alone Fluidic Thrust-Vectoring (FTV) system for the purpose of longitudinal trim of an unmanned aerial vehicle is the focus of the research presented in this paper. Since the fluidic thrust vectoring requires high pressure secondary air to deflect the engine exhaust gases, this research also provides an analytical toolset for preliminary sizing of a suitable sec...
متن کامل