Electrodeposition of Nickel onto 12K Carbon Fibre Tow in a Continuous Manner
نویسنده
چکیده
Nickel-coated carbon fibre (NiCCF) is an important composite material, which finds numerous engineering applications, primarily within: computer, telecommunication, automotive and military industries. In general, NiCCF can be produced by one of the three methods, namely: chemical vapour deposition (CVD), electroless, and electrochemical (galvanic) deposition of Ni on a carbon fibre tow material. The present paper reports a study of the process of nickel electrodeposition (at ultrathin layers of ≈ 0.3–0.5 μm) onto the surface of 12K (12 000 single filaments) carbon fibre (CF) tow, carried-out in a continuous way. In addition, the effect of selected pre-treatments applied to carbon fibre, as well as that of operational parameters of the process, on the quality of the NiCCF product were investigated. (doi: 10.5562/cca1743)
منابع مشابه
Highly improved methanol oxidation onto carbon paste electrode modified by nickel particles dispersed into poly (2,5-dimethylaniline) film
In this work, modification of carbon paste electrode surface with poly (2, 5-Dimethyl aniline) (P-2,5-DMA) by using electrochemical polymerization was described. Then, transition metal ions of Ni(II) were incorporated into the polymer film by two ways. At first way, the polymeric modified electrode was immersed in 0.2 M NiSO4 solutions and the second way was carried out by electrodeposition of ...
متن کاملFriction of carbon fibre tows
The fundamental frictional behaviour of carbon fibre tows relevant to composite fabric forming is explored. Tow-on-tool and tow-on-tow contact are considered. For tow-on-tool contact, an experiment is devised to simultaneously observe the true filament contact length and measure the friction force over a range of normal loads. Filament contact length is not constant, as would be given from an i...
متن کاملHistological response to carbon fibre.
The soft tissue response to carbon fibre was studied histologically one and a half years after being used to reconstruct the lateral collateral ligament of the human knee. A remarkably consistent pattern was seen in the induced ligament. The basic pattern was a "composite unit", consisting of a core of carbon fibre enveloped in a concentric manner by coherent layers of fibroblasts and collagen ...
متن کاملCr (VI)/Cr (III) SPECIATION BY IN SITU ELECTRODEPOSITION ONTO TUBE PRIOR TO ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRY
متن کامل
3D tin anodes prepared by electrodeposition on a virus scaffold
A patterned coreeshell tin (Sn) nanorod anode is fabricated by pulse electrodeposition of Sn onto a selfassembled Tobacco Mosaic Virus (TMV) structured nickel current collector. Pulse electrodeposition onto the virus assembled 3D electrode surfaces produces homogenous Sn coatings with significant void space to accommodate the large volume change associated with Sn lithiation. The TMV enabled 3D...
متن کامل