Design of Linear Controllers applied to an ethanol steam reformer for PEM fuel cell applications
نویسندگان
چکیده
This paper focuses on the design of a controller for a low temperature ethanol steam reformer for the production of hydrogen to feed a Protonic Exchange Membrane (PEM) fuel cell. It describes different control structures for the reformer and treats the control structure selection of this Multiple Input Multiple Output (MIMO) system. For each control structure, decentralised 2x2 controllers with Proportional Integral (PI) control actions in each control loop are implemented. The PI parameters are tuned and the performance of the different linear controllers is compared through simulation. For the evaluation of the proposed controllers, the dynamic response for different initial conditions and changes in the references is analysed, as well as the behaviour of the controlled system against disturbances.
منابع مشابه
Near-Optimal Controls of a Fuel Cell Coupled with Reformer using Singular Perturbation methods
A singularly perturbed model is proposed for a system comprised of a PEM Fuel Cell(PEM-FC) with Natural Gas Hydrogen Reformer (NG-HR). This eighteenth order system is decomposedinto slow and fast lower order subsystems using singular perturbation techniques that provides tools forseparation and order reduction. Then, three different types of controllers, namely an optimal full-order,a near-opti...
متن کاملDesign of Optimization-based Controllers Applied to an Ethanol Steam Reformer for Hydrogen Production
This paper focuses on the control of a low-temperature ethanol steam reformer for in-situ hydrogen production. For this purpose, three optimization-based control configurations are proposed, namely, a linear model-based predictive controller, a linear quadratic regulator with output error integral action and a cascade control combining the two previous configurations. In all cases, control obje...
متن کاملDynamic modeling and controllability analysis of an ethanol reformer for fuel cell application
This work presents a controllability analysis of a low temperature ethanol reformer based on a cobalt catalyst for fuel cell application. The study is based on a nonlinear dynamic model of a reformer which operates in three separate stages: ethanol dehydrogenation to acetaldehyde and hydrogen, acetaldehyde steam reforming, and water gas shift reaction. The controllability analysis is focused on...
متن کاملOn the Efficiency of the Fuel Cell Vehicles with Onboard Hydrogen Generation
The present paper explores the impact of an on-board hydrogen harvesting system (fuel reformer) on the overall efficiency of a fuel-cell powered vehicle. Various methods of hydrogen production for automotive applications have been discussed first. As the hydrogen production is one of the major challenges for application of proton exchange membrane (PEM) fuel cells, especially in vehicular indus...
متن کاملWater-balance Assessment in a Reformer/Fuel-cell System
Abstract. In PEM fuel cells pure hydrogen is used as a fuel. Due to its low density, the density of its stored energy is low, too. One of the possible solutions to the problem is production of hydrogen from the energy-reach material, e.g. methanol. Conversion of methanol to hydrogen is made with reformer in a steam reforming process in which besides methanol there is also water needed. On the o...
متن کامل