A Modeling Approach for Predicting the Abrasive Particle Motion During Chemical Mechanical Polishing
نویسندگان
چکیده
Chemical mechanical polishing (CMP) is a manufacturing process in which a wafer surface is polished by pressing it against a rotating pad that is flooded with slurry. The slurry itself is a fluid containing abrasive particles. Past experimentation has shown that the distribution of suspended particles in the slurry is significantly related to the distribution of material removal on the wafer during CMP. Therefore, this study involves the development and simulation of a model that predicts the kinematics and trajectory of the abrasive particles. The simulation results compare well to data from shear cell experiments data conducted by other researchers. DOI: 10.1115/1.2768614
منابع مشابه
A statistical model for material removal prediction in polishing
This paper develops analytically a statistical model for predicting the material removal in mechanical polishing of material surfaces (MS). The model was based on the statistical theory and the abrasive–MS contact mechanisms. The pad-MS and pad-abrasive-MS interactions in polishing were characterised by contact mechanics. Two types of active abrasive particles in the polishing system were consi...
متن کاملA Material Removal Model for CMP Based on the Contact Mechanics of Pad, Abrasives, and Wafer
Applied pressure in chemical mechanical polishing CMP is shared by the two-body pad–wafer and the three-body pad–abrasive– wafer contacts. The fraction of applied pressure transferred through the particle contacts is a significant factor as most of the material removal is due to abrasive particles trapped in the pad–wafer interface. In this work, the contact of a rough, deformable pad and a smo...
متن کاملRecent Advances in Polishing of Advanced Materials
This article discusses the recent advances in polishing of advanced materials. Ninety-five journal articles published in 2005–2007 are briefly introduced. The topics are advances in chemical mechanical polishing (CMP), fluids for polishing, modeling of polishing, polishing of brittle materials, robotic polishing, polishing with vibrations or beams, and friction in polishing processes. CMP is pe...
متن کاملThe Effects of Interfacial Particles on the Contact of an Elastic Sphere With a Rigid Flat Surface
In chemical mechanical polishing (CMP), a rigid wafer is forced on a rough elastomeric polishing pad, while a slurry containing abrasive particles flows through the interface. One of the important factors that influence the material removal rate in CMP is the magnitude of contact force transmitted to the abrasive particles trapped at the contact interface. The total push-down force is distribut...
متن کاملMaterial Removal Mechanism in Chemical Mechanical Polishing: Theory and Modeling
The abrasion mechanism in solid-solid contact mode of the chemical mechanical polishing (CMP) process is investigated in detail. Based on assumptions of plastic contact over wafer-abrasive and pad-abrasive interfaces, the normal distribution of abrasive size and an assumed periodic roughness of pad surface, a novel model is developed for material removal in CMP. The basic model is = removed, wh...
متن کامل