Study on Phosphorus Microscopic Enrichment Regularity of Earlier and Final Slag in Double –slag Steelmaking

نویسنده

  • W. W. MAO
چکیده

C. X. Li, H. Li, H. Lu, W. W. Mao: State key laboratory of advanced Metallurgy, University of Science and Technology Beijing, China This work examined phosphorus enrichment in different micro areas of the earlier slag and the final slag in converter double-slag technology. The results show that: phosphorus has high enrichment in the micro-area the basictity of which is between 2 to 2,5; the phosphorus content is at a higher point in the micro area with a silicon (Si) content of 9 % ~ 12 % in the final slag or 13 % ~ 14 % in the earlier slag; phosphorus can reach the maximum value when the ferrum content is between 5 % ~ 9 %, higher phosphorus content appears in the micro zone with a low magnesium content.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigations of Calcium Aluminate Slag Penetration to MgO Monolithic Refractories in Steelmaking Process

In this study, slag penetration into a magnesia refractory monolithic was investigated by the crucible test method. A synthetic calcium aluminate slag system has been used to study commercial magnesia mix refractory for 1, 2, 3, 4, 5 and 6 hours at 1450°C and 1600°C. It has been shown that the penetration rate is controlled by a diffusion mechanism at 1450°C. In this case, capillaries are the ...

متن کامل

Application practice of BOF Slag tailings in steelmaking process

The present paper introduces the steel production and BOF slag processing techniques in Steelmaking Sector of Bayuquan Iron and Steel Subsidiary, Ansteel. The technology of slag tailings utilization has been developed under the consideration of the properties of slag tailing and the characteristics of slag forming in BOF steelmaking operation practice. The processing of the BOF slag includes ho...

متن کامل

Computer Simulation of Slag Splashing in a Steelmaking Converter

Some variables that influence the slag splashing phenomenon in an oxygen steelmaking converter are numerically analyzed in this work. The effect of lance height, jet velocity, jet exit angle and slag viscosity on the washing and ejection mechanisms of slag splashing is studied in this work employing twodimensional transient computational fluid dynamics simulations. A parameter here called avera...

متن کامل

The effective parameters on thermal recovery and reduction of iron oxides in EAF slag

Steelmaking slag of Mobarakeh Steel Company (MSC) has a high iron content which makes it unsuitable for conventional slag recovery; as in cement industries. On the other hand, EAF slag in this company is almost free of zinc because of using more than 90 percent DRI in the charge. Therefore, removal or recovery of iron from the slag can be a suitable solution to slag recovery in this company. In...

متن کامل

Processing and Reusing Technologies for Steelmaking Slag

About 40 million tons of steel slag a year, which is the by-product of iron and steel manufacture, is generated in Japan and the almost all the slag is reused for the materials, e.g. cement raw material, road base course material and civil engineering material, by effectively utilizing its characteristics such as chemical components and mechanical properties. Most of its purposes of uses are to...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016