Long-term Stress of Simply Supported Steel-concrete Composite Beams
نویسندگان
چکیده
The theoretical model to compute the long-term stress of simply supported steel-concrete composite beam was deduced. The model includes the effects of steel bars in concrete slab, concrete shrinkage and creep. The computed results agreed well with the test results. On this basis, the effects of factors such as concrete age to loading, longitudinal reinforcement ratio in concrete slab, concrete slab width, steel beam height, environmental yearly average relative humidity, external load value and concrete strength on the long-term stress of steel-concrete composite beams are discussed. The results show that the additional stress at the top of concrete slab is tensile stress and that at the bottom of steel beam is compressive stress. The ratio of steel beam to concrete slab thickness, as well as concrete slab width and the longitudinal reinforcement ratio in concrete slab can not be ignored. Concrete strength, external load value and concrete age to loading have relatively bigger effect as well, But the environmental yearly average relative humidity has less impact. The fruits are useful to the design and application of steel-concrete composite beams.
منابع مشابه
Flexural Behavior of Reinforced HPFRCC Beams
High Performance Fiber Reinforced Cementitious Composite (HPFRCC) materials exhibit strain hardening behavior with multiple cracking under tensile loading. In this paper, experimental and parametric studies are performed to assess the influence of using HPFRCC material instead of normal concrete in reinforced concrete beams. After calibrating the experimental results, the analytical results inc...
متن کاملRetrofitting of Reinforced Concrete Beams with Steel Fiber Reinforced Composite Jackets
In the present study, a new method for retrofitting reinforced concrete beam is introduced in which steel-concrete composite jackets containing steel fiber is used. For this purpose, 75% of the peripheral surface of reinforced concrete beams was initially reinforced using steel plates and bolts, and steel fiber reinforced concrete was used between the steel plates and the peripheral surfaces of...
متن کاملFlexural Behaviour of RCC Beams
Concrete is the material which is rapidly used in various conditions to sustain the compression loads and the corresponding bending and shear stress due to the applied compressive loads. The major drawback in concrete is that it is poor in tension though it is very efficient in compression. Hence to overcome this major drawback the concrete must be reinforced such that to make a homogeneous sub...
متن کاملSecond order nonlinear inelastic analysis of composite steelâ•ficoncrete members. I: theory
A total Lagrangian finite element FE model has been formulated for the nonlinear inelastic analysis of both composite beams and columns. An accurate rotation matrix is used in the position vector analysis and nonlinear strain derivations. The slip between the steel and concrete components due to the flexible shear connection at their interface is considered as an independent displacement in the...
متن کاملInvestigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method
The composite structural system (RCS) is a new type of moment frame, which is including a combination of concrete columns (RC) and steel beams (S). These structural systems have the advantages of both concrete and steel frames [1]. In previous research on composite structures, there are some studies regarding RCS composite conections, but there is no investigation about seismic resisting system...
متن کامل