Characterization of SPAD Array for Multifocal High-Content Screening Applications
نویسندگان
چکیده
Current instruments used to detect specific protein-protein interactions in live cells for applications in high-content screening (HCS) are limited by the time required to measure the lifetime. Here, a 32 × 1 single-photon avalanche diode (SPAD) array was explored as a detector for fluorescence lifetime imaging (FLIM) in HCS. Device parameters and characterization results were interpreted in the context of the application to determine if the SPAD array could satisfy the requirements of HCS-FLIM. Fluorescence lifetime measurements were performed using a known fluorescence standard; and the recovered fluorescence lifetime matched literature reported values. The design of a theoretical 32 × 32 SPAD array was also considered as a detector for a multi-point confocal scanning microscope.
منابع مشابه
Development of a doubly weighted Gerchberg-Saxton algorithm for use in multibeam imaging applications.
We report on the development of a doubly weighted Gerchberg-Saxton algorithm (DWGS) to enable generation of uniform beamlet arrays with a spatial light modulator (SLM) for use in multiphoton multifocal imaging applications. The algorithm incorporates the WGS algorithm as well as feedback of fluorescence signals from the sample measured with a single-photon avalanche diode (SPAD) detector array....
متن کاملFill-factor improvement of Si CMOS single-photon avalanche diode detector arrays by integration of diffractive microlens arrays.
Single-photon avalanche diode (SPAD) detector arrays generally suffer from having a low fill-factor, in which the photo-sensitive area of each pixel is small compared to the overall area of the pixel. This paper describes the integration of different configurations of high efficiency diffractive optical microlens arrays onto a 32 × 32 SPAD array, fabricated using a 0.35 µm CMOS technology proce...
متن کاملCharacterization of Single-Photon Avalanche Diodes in Standard 140-nm SOI CMOS Technology
We report on the characterization of single-photon avalanche diodes (SPADs) fabricated in standard 140-nm silicon on insulator (SOI) complementary metal-oxide-semiconductor (CMOS) technology. As a methodology for SPAD optimization, a test structure array, called SPAD farm, was realized with several junctions, guard-ring structures, dimensions, etc. In this paper, characterization results of the...
متن کاملA SPAD-based 3D imager with in-pixel TDC for 145ps-accuracy ToF measurement
The design and measurements of a CMOS 64 × 64 Single-Photon Avalanche-Diode (SPAD) array with in-pixel Time-to-Digital Converter (TDC) are presented. This paper thoroughly describes the imager at architectural and circuit level with particular emphasis on the characterization of the SPAD-detector ensemble. It is aimed to 2D imaging and 3D image reconstruction in low light environments. It has b...
متن کاملLinoSPAD: A Compact Linear SPAD Camera System with 64 FPGA-Based TDC Modules for Versatile 50 ps Resolution Time-Resolved Imaging
The LinoSPAD camera system is a modular, compact and versatile time-resolved camera system, combining a linear 256 high fill factor pixel CMOS SPAD (single-photon avalanche diode) sensor with an FPGA (field-programmable gate array) and USB 3.0 transceiver board. This modularization permits the separate optimization or exchange of either the sensor front-end or the processing back-end, depending...
متن کامل