Compact Microstrip Antenna for Rfid Applications
نویسندگان
چکیده
This work presents a planar antenna for Ultra-HighFrequency (UHF) Radio Frequency Identification (RFID) Tags to be applied on metallic surfaces. The proposed radiating structure consists of a short-circuited patch antenna designed with a fractal geometry, resulting in a very compact and cost effective Tag. Showing a very good platform tolerance, such a Tag is also suitable for application on different kinds of materials (metal, glass, etc.).
منابع مشابه
A compact stacked Quasi-fractal microstrip antenna for RFID applications
In this paper, we propose a new compact quasi-fractal shaped microstrip antenna that consists of a hexagonal patch as the main radiator and a complementary stacked patch as the parasitic element. The overall surface of the proposed quasi-fractal patch is about 55% lower than the conventional hexagonal patch. Using of stacked technique, the gain reduction of compression technique is almost compe...
متن کاملDesign and Miniaturization of a Novel Fractal Microstrip Antenna for UWB Applications
A novel printed octagonal fractal microstrip antenna with semi-elliptical ground plane is presented for ultra wide band applications. The proposed antenna has a compact size of 20×20×1 mm³. The measured result of the antenna exhibits the ultra wide band characteristics from 2/9 to 14/2 GHz. In this paper, reducing antenna’s size by 35%, the same results were achieved, while small dimension frac...
متن کاملDevelopment of A Compact and Low Profile Cavity Backed Slot Antenna Using Microstrip Gap Waveguide Technology
Proof of concept of a cavity backed slot antenna based on inverted microstrip gap waveguide (IMGW) technology is presented. Since the antenna is operating based on the first resonating mode of the cavity, it is more compact compared to the ordinary cavity backed slot antennas in which the second cavity mode is used for radiation. Furthermore, the proposed antenna element introduces lower lo...
متن کاملMicrostrip Yagi-Uda Antenna for 2.45 GHz RFID Handheld Reader
This paper proposes a compact microstrip Yagi-Uda antenna for 2.45 GHz radio frequency identification (RFID) handheld reader applications. The proposed antenna is etched on a piece of FR4 substrate with an overall size of 65 mm × 55 mm ×1.6 mm and consists of a microstrip balun, a dipole, and a director. The ground plane is designed to act as a reflector that contributes to enhancing the antenn...
متن کامل14 Circularly Polarized Slotted / Slit - Microstrip Patch Antennas
In modern wireless communication systems, small circularly polarized microstrip antennas with good performance are desirable mainly at low microwave frequencies. The radio frequency identification (RFID) systems in the ultra-high frequency (UHF) band have gained much interest in many services [Finkenzeller2004]. The reader antenna is one of the important components in the RFID reader system and...
متن کامل