Direct femtosecond laser writing of waveguides in As2S3 thin films.

نویسندگان

  • Arnaud Zoubir
  • Martin Richardson
  • Clara Rivero
  • Alfons Schulte
  • Cedric Lopez
  • Kathleen Richardson
  • Nicolas Hô
  • Réal Vallée
چکیده

Single-channel waveguides and Y couplers were fabricated in chalcogenide thin films by use of femtosecond laser pulses from a 25-MHz repetition rate Ti:sapphire laser. Refractive-index differentials (delta n > 10(-2)) were measured through interferometric microscopy and are higher than the typical values reported for oxide glasses. The dependence of the index differential on the peak intensity reveals the nonlinear nature of the photosensitivity in arsenic trisulfide below its bandgap energy, and the refractive-index change is correlated to the photoinduced structural changes inferred by Raman spectroscopy data. A free-electron model to predict the parametric dependence of delta n is proposed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

LASER EMISSION IN DIODE-PUMPED Nd:YAG SINGLE-CRYSTAL WAVEGUIDES REALIZED BY DIRECT FEMTOSECOND-LASER WRITING TECHNIQUE

Buried waveguides have been realized in a 0.7 at.% Nd:YAG single crystal using the direct-writing technique with a femtosecond laser. Efficient laser emission at 1.06 and 1.32 μm is demonstrated and laser action at 0.94 μm is obtained using the pump with fiber-coupled diode laser at 807 nm, the first demonstration of such devices.

متن کامل

Study of the influence of femtosecond laser polarisation on direct writing of waveguides.

Optical devices were fabricated in fused silica using the femtosecond direct write technique. We found that the transmission of light through directly written waveguides, whether straight or curved, can be increased by writing waveguides using circularly rather than linearly polarised radiation.

متن کامل

Dry-etch of As2S3 thin films for optical waveguide fabrication

Plasma etching to As2S3 thin films for optical waveguide fabrication has been studied using a helicon plasma etcher. The etching effects using the processing gases or gas mixtures of O2, Ar, and CF4 were compared. It was found that the O2 plasma had no chemical etching effect to the As2S3, but it could oxidize the surface of the As2S3. The Ar plasma provided a strong ion sputtering effect to th...

متن کامل

Transverse writing of three-dimensional tubular optical waveguides in glass with a slit-shaped femtosecond laser beam

We report on fabrication of tubular optical waveguides buried in ZBLAN glass based on transverse femtosecond laser direct writing. Irradiation in ZBLAN with focused femtosecond laser pulses leads to decrease of refractive index in the modified region. Tubular optical waveguides of variable mode areas are fabricated by forming the four sides of the cladding with slit-shaped femtosecond laser pul...

متن کامل

Title of Thesis : DIRECT LASER FABRICATION OF DIFFRACTION GRATINGS ON POLYMER THIN FILMS AND WAVEGUIDES

Title of Thesis: DIRECT LASER FABRICATION OF DIFFRACTION GRATINGS ON POLYMER THIN FILMS AND WAVEGUIDES Glenn D Hutchinson, Master of Science, 2005 Thesis Directed By: Professor Chi H. Lee, Department of Electrical and Computer Engineering With the increasing interest in polymer integrated optical devices, techniques for fabrication of efficient polymer diffraction gratings are of critical impor...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics letters

دوره 29 7  شماره 

صفحات  -

تاریخ انتشار 2004