Additive Manufacturing: Reproducibility of Metallic Parts
نویسندگان
چکیده
The present study deals with the properties of five different metals/alloys (Al-12Si, Cu-10Sn and 316L—face centered cubic structure, CoCrMo and commercially pure Ti (CP-Ti)—hexagonal closed packed structure) fabricated by selective laser melting. The room temperature tensile properties of Al-12Si samples show good consistency in results within the experimental errors. Similar reproducible results were observed for sliding wear and corrosion experiments. The other metal/alloy systems also show repeatable tensile properties, with the tensile curves overlapping until the yield point. The curves may then follow the same path or show a marginal deviation (~10 MPa) until they reach the ultimate tensile strength and a negligible difference in ductility levels (of ~0.3%) is observed between the samples. The results show that selective laser melting is a reliable fabrication method to produce metallic materials with consistent and reproducible properties.
منابع مشابه
Vibration Assisted Robotic Hot-wire Gas Tungsten Arc Welding (gtaw) for Additive Manufacturing of Large Metallic Parts
Most of the metal additive manufacturing technologies are focused on high cost and high end applications. There is in need, a low cost additive manufacturing technology suitable for low and high end metallic applications. Robotic automated welding can be considered as an alternative to manufactured large scale metal parts with layer by layer approach. However, many obstacles have to be overcome...
متن کاملMetal Additive Manufacturing: A Review
This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, or 3D printing, etc. A broad contextual overview of metallic AM is provided. AM has the potential to revolutionize the global parts manufacturing and logistics landscape. It enables dist...
متن کاملComplex metallic alloys as new materials for additive manufacturing
Additive manufacturing processes allow freeform fabrication of the physical representation of a three-dimensional computer-aided design (CAD) data model. This area has been expanding rapidly over the last 20 years. It includes several techniques such as selective laser sintering and stereolithography. The range of materials used today is quite restricted while there is a real demand for manufac...
متن کاملApplication of Additive Manufacturing in Marine Industry
The advantage of additive manufacturing (AM) (e.g. reasonable time and expense in prototyping, and reliable product) has triggered the idea of using this method in manufacturing of marine vessels components. The current article tries to introduce basic concepts of AM method and its application in marine industry; have a glance at additive-manufactured parts microstructure; elaborate the challen...
متن کاملNew-emerging approach for fabrication of near net shape aluminum matrix composites/nanocomposites: Ultrasonic additive manufacturing
Recently, high-performance lightweight materials with outstanding mechanical properties have opened up their way to some sophisticated industrial applications. As one of these systems, aluminum matrix composites/nanocomposites (AMCs) offer an outstanding combination of relative density, hardness, wear resistance, and mechanical strength. Until now, several additive manufacturing methods have be...
متن کاملPrintability of alloys for additive manufacturing
Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate...
متن کامل