The Adsorption of an Epoxy Acrylate Resin on Aluminium Alloy Conversion Coatings

A thermodynamic study of the adsorption of an epoxy acrylate resin used for UV-cured coatings on two different anti corrosion pretreatments on aluminium alloys relevant to aerospace industry has been undertaken. Aluminium alloy Al2219 specimens, treated with an inorganic chromate based conversion coating (Alodine 1200S) and an organic titanium based conversion coating (Nabutan STI/310), were immersed in solutions of different concentrations of the resin and adsorption isotherms were determined by assessing the uptake of the adsorbate, as a function of solution concentration, by time-of-flight secondary ion mass spectrometry (ToF-SIMS). The results show different behaviour for the two substrates, which can be attributed to the organic component of the titanium based coating. In the case of the inorganic conversion coating a clear plateau is achieved at relatively low concentrations and at a lower level of adsorption than for the hybrid coating. The data for both the coatings conform well to the Langmuir model, the organic coating, as well as showing a higher level of adsorption of the resin, also presents oscillatory behaviour at low concentration, which is shown to be complementary to the behaviour of the reactive diluent included with the epoxy acrylate to aid processing. A discussion of this competitive adsorption of the epoxy resin and the diluent on the different substrates is presented, based on considerations of the chemistry of the systems under investigation.