The effect of thymoquinone coating on adhesive properties of polypropylene mesh
نویسندگان
چکیده
BACKGROUND An incisional hernia is a common complication following abdominal surgery. Polypropylene mesh is frequently used in the repair of such defects and has nearly become the standard surgical treatment modality. Though they are very effective in reducing recurrence, mesh materials exhibit a strong stimulating effect for intraabdominal adhesion. The thymoquinone (TQ) extracted from Nigella sativa seeds has potential medical properties. TQ has anti-inflammatory, antioxidant and antibacterial properties. The aim of this study is to coat polypropylene mesh with TQ in order to investigate the effect of surface modification on intraabdominal adhesions. METHODS TQ-coated polypropylene mesh material was tested for cytotoxicity, contact angle, surface spectroscopy, TQ content, sterility, and electron microscopic surface properties. An experimental incisional hernia model was created in study groups, each consisting of 12 female Wistar rats. The defect was closed with uncoated mesh in control group, with polylactic acid (PLA) coated mesh and PLA-TQ coated mesh in study groups. Adhesion scores and histopathologic properties were evaluated after sacrifice on postoperative 21th day. RESULTS Granuloma formation, lymphocyte and polymorphonuclear leukocyte infiltration, histiocyte fibroblast and giant cell formation, capillary infiltration, collagen content were significantly reduced in the PLA-TQ coated mesh group (p < 0.05). Though not statistically significant, likely due to the limited number of study animals, adhesion formation was also reduced in the PLA-TQ coated mesh group (p: 0.067). CONCLUSION TQ coated mesh is shown to reduce adhesion formation and TQ is a promising coating material for mesh surface modification.
منابع مشابه
Mechanical Properties of Polypropylene Coating Containing Maleic Anhydride on Plain Carbon Steel
Using Electrostatic Spray Coating Technique, Polypropylene Powder (EPD 60R) was applied on carbon steel substrates at room temperature. In order to obtain a uniform coating, steel substrates with powder coatings were heated in a vacuum oven at various temperatures up to 250° C for various periods of time up to 45 min and a pressure of 200 mb. The coatings produced had thicknesses of around 470 ...
متن کاملMechanical Properties of Polypropylene Coating Containing Maleic Anhydride on Plain Carbon Steel
Using Electrostatic Spray Coating Technique, Polypropylene Powder (EPD 60R) was applied on carbon steel substrates at room temperature. In order to obtain a uniform coating, steel substrates with powder coatings were heated in a vacuum oven at various temperatures up to 250° C for various periods of time up to 45 min and a pressure of 200 mb. The coatings produced had thicknesses of around 470 ...
متن کاملInflammatory reaction to fish oil coated polypropylene mesh used for laparoscopic incisional hernia repair: a case report
BACKGROUND Polypropylene meshes are widely used in hernia repairs. Hernia meshes have been developed incorporating coatings of active agents. One commercially available mesh has a fish oil coating which is promoted as having anti-inflammatory properties. We report a case, a symptomatic foreign body granuloma reaction associated with a fish oil coated polypropylene mesh, which required eventual ...
متن کاملOptimization mechanical properties of polyurethane/Sio2 nanocomposite on Polypropylene substrate for automotive clear coating by Taguchi method
The effect of different parameters including: nano silica content, curing temperature, type of hardener, and flash-off time on mechanical and optical properties of polyurethane PU based clearcoat was investigated via standard Taguchi L9 method. Dispersion of nano silica in the resultant nanocomposites was explored by scanning electron microscopy SEM. SEM images showed a fine dispersion through ...
متن کاملA randomized controlled experimental study comparing chitosan coated polypropylene mesh and Proceed™ mesh for abdominal wall defect closure
BACKGROUND Abdominal wall defects and hernias are commonly repaired with synthetic or biological materials. Adhesions and recurrences are a common problem. A study was conducted to compare Chitosan coated polypropylene mesh and a polypropylene-polydioxanone composite with oxidized cellulose coating mesh (Proceed™) in repair of abdominal wall defect in a Rabbit hernia model. METHODS A randomiz...
متن کامل