A Compact Printed Monopole Antenna for Dual-band RFID and WLAN Applications
نویسندگان
چکیده
Design of a simple and compact microstrip-fed printed monopole antenna (PMA) for applications in wireless local area network (WLAN) and radio frequency identification (RFID) is presented. The dual-band operation is achieved from the 9-shaped folded antenna which is printed on a non-conductor backed dielectric. Measured percentage impedance bandwidth of the PMA at the center frequencies of 2.43 GHz and 5.24 GHz are 33.13 (2.14 GHz to 2.99 GHz) and 36.43 (4.40 GHz to 6.36 GHz) respectively. Consistent omnidirectional radiation patterns have been observed in both the frequency bands from the experimental results. The proposed antenna is simple in design and compact in size. It exhibits broadband impedance matching, consistent omnidirectional radiation patterns and appropriate gain characteristics (>2.5 dBi) in the RFID and WLAN frequency regions.
منابع مشابه
A Novel Small E–Ring Shaped Monopole Antenna with Dual Band-Notch Function for UWB Wireless Communications
This paper presents an E-ring shaped printed monopole antenna for UWB applications with dual notched bands performance. In order to generate single frequency band notch function, we applied a U-ring shaped monopole antenna, and by inserting a rectangular ring in the centre of it an E-ring shaped radiating patch created and a dual band-notch function can be achieved. The measured bandwidth of th...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملA Compact Dual-Band Printed Monopole Antenna for WiMAX/WLAN Applications
A compact printed dual-band antenna for WiMAX/WLAN applications is proposed in this paper. The dual-band monopole antenna consists of a triangular patch and two folding arms shorted to the ground plane. The proposed antenna features a low profile and compact dimension. To avoid via process in the fabrication, the triangular patch and two folding arms are separately constructed on the two sides ...
متن کاملA Multiband Multiple-input Multiple-output Antenna System for Long Term Evolution and Wireless Local Area Networks Handsets
A novel multiband multiple-input-multiple-output (MIMO) antenna system is proposed. The MIMO antenna system consists of two antenna elements, each of which comprises of three radiators: a driven monopole, an S-shaped strip and an inverted F-shaped strip and occupies footprint of 15x18.5x0.8 mm3 only. The driven monopole acts as a quarter-wave monopole and stimulate higher mode resonance. The tw...
متن کاملDesign of Internal Dual Band Printed Monopole Antenna Based on Peano-type Fractal Geometry for WLAN USB Dongle
This paper introduces the design of a new dual-band internal printed monopole antenna structure as a candidate for WLAN (wireless local area network) USB (universal serial bus) dongle applications. The proposed antenna structure is based on the second iteration of Peanotype space-filling geometry. The antenna has been printed on a substrate with relative permittivity of 2.33 and thickness of 0....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011