Catalytic Hydrogenation of Carbon Monoxide
نویسندگان
چکیده
The hydrogenation of carbon monoxide and carbon dioxide on various steel catalysts was studied in the temperature range of 800" to 1,300'F. and at pressures from 5 to 30 atm. The feed gases (3.75 to 20 SCFH) were passed over a catalyst bed of 1/8-h. steel balls supported in a brass-lined reactor 0.81 in. in d i m . The percentage of carbon oxides in the feed was 30% in the runs using a Hz-COZ feed and varied from 15 to 38% in the runs with a H,-CO feed. The effects of temperature, pressure, feed composition, space velocity, and mass velocity were studied. Carbon deposition did not affect the activity of the catalyst and could be removed readily.
منابع مشابه
Aqueous-phase Fischer-Tropsch synthesis with a ruthenium nanocluster catalyst.
Introduction Hydrogenation of carbon monoxide to produce hydrocarbons, normally called Fischer-Tropsch synthesis (F-T synthesis), is one of the most important hydrogenation reactions due to its potential for the intermediate production of hydrocarbon fuels in the “postpetroleum” era. The reaction is favored at low-temperature and therefore reducing the particle size of the catalyst to several n...
متن کاملCatalytic Oxidation of Carbon Monoxide by Cobalt Oxide Catalysts Supported on Oxidized-MWCNT
Cobalt oxide catalysts supported on oxidized multi-walled carbon nanotubes (MWCNT) for the low-temperature catalytic oxidation of carbon monoxide were prepared by an impregnation-ultrasound method. These catalysts were characterized by N2 adsorption/desorption, TEM, XRD, Raman, and H2-TPR methods. The XRD and Raman results indicated that the phase of the synthesized cobalt...
متن کاملFischer-Tropsch Synthesis The CAER Perspective
The discovery of the catalytic synthesis of ammonia must rank as one of the important discoveries by mankind. In addition to providing the fertilizer needed to feed an expanding population, Fritz Haber’s recognition of recycle processing combined with the developing German technology to handle high pressures of hydrogen, led a major revolution in the chemical industry. In rapid succession, the ...
متن کاملPreparation of PdCu Alloy Nanocatalysts for Nitrate Hydrogenation and Carbon Monoxide Oxidation
Alloying Pd with Cu is important for catalytic reactions such as denitrification reaction and CO oxidation reaction, but understanding of the catalyst preparation and its correlation with the catalyst’s activity and selectivity remains elusive. Herein, we report the results of investigations of the preparation of PdCu alloy nanocatalysts using different methods and the catalytic properties of t...
متن کاملA DFT Study of CO2 Hydrogenation on Faujasite‐Supported Ir4 Clusters: on the Role of Water for Selectivity Control
Reaction mechanisms for the catalytic hydrogenation of CO2 by faujasite-supported Ir4 clusters were studied by periodic DFT calculations. The reaction can proceed through two alternative paths. The thermodynamically favoured path results in the reduction of CO2 to CO, whereas the other, kinetically preferred channel involves CO2 hydrogenation to formic acid under water-free conditions. Both pat...
متن کامل