The Impact of Plus-Sized Wheel/Tire Fitment on Vehicle Stability
نویسندگان
چکیده
Plus-sizing in the tire industry is the growing practice of replacing a vehicle’s original equipment wheel size with a larger diameter wheel and replacing the tire with a lower aspect ratio tire of the same diameter. This practice is normally associated with aftermarket sales, and there is a growing trend for vehicle dealerships to fit these larger wheels/tires to new cars. This paper discusses the general practice and its effect on some of the performance characteristics of vehicles. A vehicle taken from the NHTSA New Car Assessment Program’s rollover “Star” rating program is used to illustrate the impact of plus sizing on static stability. Some of the dynamic tire effects that could influence vehicle stability are discussed and preliminary testing data on the dynamic impact of plus sizing are presented.
منابع مشابه
Technical Considerations for Plus-Sizing
Plus-sizing, or the fitting of larger diameter rims and lower profile tires to vehicles, continues to be a significant commercial force in the tire marketplace. When offering plus-size fitments to customers, many sellers simply offer “what fits” on a given vehicle. However, the various choices made by the seller, such as wheel width, wheel offset, inflation pressure, and so on, have the potenti...
متن کاملComprehensive Investigating on the Aerodynamic Influences of the Wheel Contact Patch
Computational fluid dynamics is implemented to investigate the influence of the wheel contact patch on the global car aerodynamics. Two main aspects of the problem are the contact step and patch shape. Three important parameters: step height, cut angle, and tire tread shape are taken into consideration. For validations of the numerical results, the experimental data are also considered. The obt...
متن کاملStability of an Electric Vehicle with Permanent-Magnet In-Wheel Motors during Electrical Faults
This paper presents an analysis of the stability of an electric vehicle equipped with in-wheel motors of permanent-magnet type during a class of electrical faults. Due to the constant excitation from the permanent magnets, the output torque from a faulted wheel cannot easily be removed if an inverter shuts down, which directly affects the vehicle stability. In this paper, the impact of an elect...
متن کاملStability of Three-Wheeled Vehicles with and without Control System
In this study, stability control of a three-wheeled vehicle with two wheels on the front axle, a three-wheeled vehicle with two wheels on the rear axle, and a standard four-wheeled vehicle are compared. For vehicle dynamics control systems, the direct yaw moment control is considered as a suitable way of controlling the lateral motion of a vehicle during a severe driving maneuver. In accorda...
متن کاملYaw Rate Control and Actuator Fault Detection and Isolation for a Four Wheel Independent Drive Electric Vehicle
In this paper, a new actuator fault detection and isolation method for a four wheel independent drive electric vehicle is proposed. Also, a controller based on sliding mode control method is proposed for lateral stability of the vehicle. The proposed control method is designed in three high, medium and low levels. At the high-level, the vehicle desired dynamics such as longitudinal speed refere...
متن کامل