Effects of mechanical properties and surface friction on elasto-plastic sliding contact

نویسندگان

  • S. C. Bellemare
  • M. Dao
  • S. Suresh
چکیده

Indentation hardness has been used extensively for material characterization and many recent computational studies have established quantitative relationships between elasto-plastic mechanical properties and the response in instrumented indentation. In contrast, very few studies have systematically quantified the effect of the plastic deformation characteristics on the frictional sliding response of metals and alloys. Building upon dimensional analysis and finite element computations, a parametric study was carried out to extend our previous work to different contact friction conditions. For a wide range of elasto-plastic and contact friction parameters, we established closed form universal functions, for various contact conditions, that relate elasto-plastic properties (Young’s modulus, yield strength, and power law hardening exponent) to steady state frictional sliding response (scratch hardness, pile-up height and overall sliding frictional coefficient). Distribution of the plastic strain beneath the indenter was studied to rationalize the deformation modes versus elasto-plastic properties and pile-up. In parallel, experiments were conducted for the effect of plastic flow characteristics on the frictional sliding (or scratch) response under different surface friction conditions. Pure copper and a brass alloy were heat-treated to vary yield strength and strain hardening exponent and the contact friction coefficient was varied by applying a liquid lubricant on the surface. Frictional sliding experiments were conducted using a nanoindentation testing system, where grain size and alloy composition were found to influence the response. Although variations in the frictional sliding response versus yield strength, strain hardening and friction were invariably coupled, the combined computational and experimental approach enabled us to isolate the relative contributions of each parameter. The results clearly demonstrated that an increase in the strain hardening exponent can significantly decrease the pile-up height, with known and further potential implications for the evaluation of tribological damage. 2007 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory

Gear’s normal contact stiffness played an important role in the mechanical equipment. In this paper, the M-B fractal model is modified and the contact surface coefficient is put forward to set up the fractal model, considering the influence of friction, which could be used to calculate accurately the involute arc cylindrical gears’ normal contact stiffness based on the fractal theory and Hertz ...

متن کامل

The frictional sliding response of elasto-plastic materials in contact with a conical indenter

Over the past decade, many computational studies have explored the mechanics of normal indentation. Quantitative relationships have been well established between the load–displacement hysteresis response and material properties. By contrast, very few studies have investigated broad quantitative aspects of the effects of material properties, especially plastic deformation characteristics, on the...

متن کامل

Earthquake Analysis of 3-D Structures on Sliding Foundation Using Yield Equation of the Contact Surface

A solution technique for the dynamic analysis of asymmetric base-isolated buildings, subject to earthquake ground motion, is presented. To develop the formulation, a yield surface as a function of both shear force and torsion moment of the sliding surface with rigid perfectly plastic behavior is constituted. To achieve the objective, the yield stress is defined by the friction coefficient throu...

متن کامل

Earthquake Analysis of 3-D Structures on Sliding Foundation Using Yield Equation of the Contact Surface

A solution technique for the dynamic analysis of asymmetric base-isolated buildings, subject to earthquake ground motion, is presented. To develop the formulation, a yield surface as a function of both shear force and torsion moment of the sliding surface with rigid perfectly plastic behavior is constituted. To achieve the objective, the yield stress is defined by the friction coefficient throu...

متن کامل

Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning

Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007