Small Strain Stiffness of Unsaturated Sands Containing a Polyacrylamide Solution

نویسندگان

  • Jongwon Jung
  • Taeseo Ku
  • Jaehun Ahn
چکیده

Sand improvements using organic agents have shown promising results. Polyacrylamide is one possible organic agent, which has been shown to influence the shear strength, stiffness, soil remediation, and erosion resistance of geomaterials. In this study, we explored the shear wave velocity (S-wave) and water retention curves of unsaturated sands containing polyacrylamide solutions. The shear wave velocity was measured during the water retention curve measurement tests according to the variation of the degree of saturation. The experimental setup was verified through comparison of the measured water retention curves with the published data. The results show that (1) the S-wave velocity of saturated sands increases with polyacrylamide concentration; (2) as the degree of saturation decreases, the S-wave velocity increases; (3) near the residual water (or polyacrylamide solution) saturation, the S-wave velocity increases dramatically; (4) as the degree of saturation decreases, the S-wave velocity at unsaturated conditions increases with any given water (or polyacrylamide solution) saturation, like the water retention curves; (5) the S-wave velocity increases with the increase in capillary pressure; and (6) the predicted S-wave velocity at a given degree of saturation is slightly overestimated, and the modification of the equation is required.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Small Scale Effects on the Large Amplitude Nonlinear Vibrations of Multilayer Functionally Graded Composite Nanobeams Reinforced with Graphene-Nanoplatelets

   The main purpose of the present investigation is to analyze more comprehensively the size-dependent nonlinear free vibration response of multilayer functionally graded graphene platelet-reinforced composite (GPLRC) nanobeams. As a consequence, both of the hardening stiffness and softening stiffness of size effect are taken into consideration by implementation of the nonlocal str...

متن کامل

Evaluation of Fatigue Properties of Asphalt Mixtures Containing Reclaimed Asphalt using Response Surface Method

This paper presents the effects of different amounts of reclaimed asphalt on fatigue life of asphalt mixtures. Central composite method was used to design of experiments based on response surface method (RSM). Binder type (Pen 60/70 and Pen 85/100), reclaimed asphalt pavement (RAP) content (25, 50 and 75%) and loading strain (150, 250 and 350 micro strain) were selected as independent variables...

متن کامل

Fatigue Behavior Analysis of Asphalt Mixes Containing Electric Arc Furnace (EAF) Steel Slag

This research was conducted in order to evaluate fatigue behavior of asphalt mixes containing Electric Arc Furnace (EAF) steel slag. After initial evaluation of the properties of EAF steel slag using X-ray Diffraction (XRD) and Scanning Electric Microscope (SEM), six sets of laboratory mixtures were prepared. Each set were treated replacing various portions of limestone aggregates of the mix wi...

متن کامل

A Novel Method to Detect β-Cyclodextrin Glucosyl Transferase (β-CGTase) Activity on Polyacrylamide Gels

b-cyclodextrin glucosyl transferase (b-CGTase) hydrolyses starch to produce b-cyclodextrin by transglycosylation (cyclization) activity. The conventional method for detection of b-CGTase activity is based on detecting starch hydrolysis by iodine staining. This method reveals all amylolytic enzymes, but can not discriminate them. In the present study, we introduce a new method for specific detec...

متن کامل

Shear Strength of Fiber-Reinforced Clayey Sands

Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 10  شماره 

صفحات  -

تاریخ انتشار 2017