Structural and Optical Characterizations of CIGST Solar Cell Materials
نویسنده
چکیده
Structural and UV/Visible optical properties can be useful to describe a material for the CIGS solar cell active layer, therefore, this work demonstrates the properties like surface morphology, X-ray Photoelectron Spectroscopy (XPS) bonding energy (EB) core level spectra, UV/Visible absorption spectra, refractive index (n), optical energy band (Eg), reflection spectra for the Cu25 (In16Ga9) Se40Te10 (CIGST-1) and Cu20 (In14Ga9) Se45Te12 (CIGST-2) chalcogenide compositions. Materials have been exhibited homogenous surface morphologies, broading /-or diffusion of bonding energy peaks relative elemental values and a high UV/Visible absorption tendency in the wave length range 400 nm850 nm range with the optical energy band gaps 1.37 and 1.42 respectively. Subsequently, UV/Visible reflectivity property in the wave length range 250 nm to 320 nm for these materials has also been discussed. Keywords—Chalcogen, Optical energy band gap, UV/Visible spectra, XPS spectra.
منابع مشابه
Fabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process
Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...
متن کاملNew high-efficiency protective coating containing glycidyl-POSS nanocage for improvement of solar cell electrical parameters
Various antireflection thin films are often used to cover glass to increase solar cell electrical parameters. In the recent years many efforts have been done to develop and improve of solar cell films with high electrical output. One of the most important challenges of obtaining of high-efficiency thin films of solar cells is creation an effective light trapping system. The new polymeric protec...
متن کاملImpacts of Nanoparticles and Nano Rod Arrays on Optical Generation Rate in Plasmonic-Based Solar Cells
In this article, the effect of plasmonics properties of metal nanorods and nanoparticles on solar cell performance were investigated and simulated. Due to the classic solar cell disadvantages, it seems that a plasmonic solar cell is one of these methods. In plasmonic solar cells, because of plasmonic effect, a high electric field builds around metal nanoparticles so that high conversion efficie...
متن کاملSolvothermal Synthesis of Cobalt and Copper Sulfides Nanoparticles with High Light Absorptance for New Solar Selective Coatings
New selective coating materials are developed and used in advanced solar collector and absorber designs with improved efficiency. Cobalt and Copper sulfides nanoparticles are high interest for absorbers of solar thermal collectors due to their optical properties and high absorptance in the solar wavelength range (> 96%). In the present work, Cobalt and Copper sulfides nanoparticles were synthes...
متن کاملEFFICIENCY ENHANCEMENT OF AMORPHOUS SILICON p-i-n SOLAR CELLS BY LP-CV
Amorphous silicon p-i-n solar cells were deposited on “in house” developed LP-CVD zinc oxide and compared with commercially available SnOa (Asahi type U2) substrates. While for both front TCO materials comparably high values of the open circuit voltage (860900 mV) and of the fill factor (72 74 %) were obtained, a remarkable enhancement of the short-circuit current density could be observed for ...
متن کامل