Deformations of large fundamental groups
نویسندگان
چکیده
منابع مشابه
A Modification on Applied Element Method for Linear Analysis of Structures in the Range of Small and Large Deformations Based on Energy Concept
In this paper, the formulation of a modified applied element method for linear analysis of structures in the range of small and large deformations is expressed. To calculate deformations in the structure, the minimum total potential energy principle is used. This method estimates the linear behavior of the structure in the range of small and large deformations, with a very good accuracy and low...
متن کاملAssessment of Soil cohesion of Soils on Tunnel Excavation
Excess pore pressure under seismic loadings has always been a main concern in geotechnical engineering practices. Undergoing the phenomenon in a soil can cause the effective stress and hence the shear strength of the soil to decrease considerably and large deformations happen in the area. Generally, increasing the pore pressure occurs under the undrained condition. If it can be formed the drain...
متن کاملAssessment of the Drain Conditions on Variations of the Pore Pressure in Surrounding Soil of the Tunnel
Excess pore pressure under seismic loadings has always been a main concern in geotechnical engineering practices. The phenomenon in soil can cause an effective stress and hence cause the shear strength of the soil to decrease considerably and large deformations to occur in the area. Generally, increases in pore pressure occur in un-drained conditions. If it is formed, its consequences decrease ...
متن کاملBehaviour Comparison of the Taleqan Dam Using Instrumentation Data and Radar Interferometry
Dams are one of the most important fundamental structures all around the world. Given the high volume of water in the dams, they are susceptible to damage and destruction, leading to large financial losses and fatality. Therefore, by installation of instrumentation data in the dam’s body and execution of terrestrial surveying network, stability and safety of dams can be monitored. However, occa...
متن کاملMinimizing distortion caused by welding, by sequencing optimization in a large steel panel
Increasingly, Welding is used in industry for assembled various products, such as ships, cars, trains and bridges. Welding distortion often results such as lack of accuracy during assembly and will have increases manufacturing costs. So, predict and reduce welding distortion is very important to improve the quality of welded structures. In this study, firstly, a prediction method of welding di...
متن کامل