Pulse Compressor Phase and Amplitude Modulation Based on Iterative Learning Control

نویسندگان

  • Amin Rezaeizadeh
  • Roger Kalt
  • Thomas Schilcher
  • Paul Scherrer
  • Roy S. Smith
چکیده

This paper presents an alternative way to produce flattopped RF pulses at the pulse compressor output. Flattopped RF pulses are suitable for multi-bunch operation where it is often required that beams experience the same accelerating gradient. Moreover, the energy gain, in this case, is less sensitive to timing jitters. The proposed approach is based on Iterative Learning Control technique, which iteratively updates the input waveforms, in order to generate the desired output waveforms.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal

The aim of this work is the application of the phase variation in vibration signal for fault detection on rotating machines. The vibration signal from the machine is modulated in amplitude and phase around a carrier frequency. The modulating signal in phase is determined after the Hilbert transform and is used, with the Fast Fourier Transform, to extract the harmonics spectrum in phase. This me...

متن کامل

Rf Pulse Flattening in the Swissfel Test Facility Based on Model-free Iterative Learning Control∗

This paper introduces an iterative approach to producing flat-topped radio frequency (RF) pulses for driving the pulsed linear accelerators in the Swiss free electron laser (SwissFEL). The method is based on model-free iterative learning control which iteratively updates the input pulse shape in order to generate the desired amplitude and phase pulses at the output of the RF system. The method ...

متن کامل

Design and Performance Analysis of 7-Level Diode Clamped Multilevel Inverter Using Modified Space Vector Pulse Width Modulation Techniques

In this paper, a 7-level Diode Clamped Multilevel Inverter (DCMLI) is simulated with three different carrier PWM techniques. Here, Carrier based Sinusoidal Pulse Width Modulation (SPWM), Third Harmonic Injected Pulse Width Modulation (THIPWM) and Modified Carrier-Based Space Vector Pulse Width Modulation (SVPWM) are used as modulation strategies. These modulation strategies include Phase Dispos...

متن کامل

Perfect Tracking of Supercavitating Non-minimum Phase Vehicles Using a New Robust and Adaptive Parameter-optimal Iterative Learning Control

In this manuscript, a new method is proposed to provide a perfect tracking of the supercavitation system based on a new two-state model. The tracking of the pitch rate and angle of attack for fin and cavitator input is of the aim. The pitch rate of the supercavitation with respect to fin angle is found as a non-minimum phase behavior. This effect reduces the speed of command pitch rate. Control...

متن کامل

Space Vector Pulse Width Modulation with Reduced Common Mode Voltage and Current Losses for Six-Phase Induction Motor Drive with Three-Level Inverter

Common-mode voltage (CMV) generated by the inverter causes motor bearing failures in multiphase drives.On the other hand, presence of undesired z-component currents in six-phase induction machine (SPIM) leads to extra current losses and have to be considered in pulse width modulation (PWM) techniques. In this paper, it is shown that the presence of z-component currents and CMV in six phase driv...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015