Dynamic Uniaxial Strain Model for Plasma-sprayed Material
نویسنده
چکیده
منابع مشابه
The Investigation of Modelling Material Behavior in Autofrettaged Tubes Made from Aluminium Alloys
Normal 0 false false false EN-US X-NONE AR-SA The ratio of compression yield strength to the initial tensile yield strength is called Bauschinger effect factor, BEF. A nonlinear strain hardening mathematical model is proposed for 7075 aluminium alloy (A7075). Uniaxial tension-compression experimental data are used to figure out a suitable model to study the BEF. Hence, uniaxial tension-co...
متن کاملShape- Dependent Term Investigation of Khan- Liu Yield/ Fracture Criterion as a Function of Plastic Strain for Anisotropic Metals
The current paper primarily aims to suggest a mathematical model for the shape-dependent term of Khan- Liu (KL) Yield/ fracture criterion as a function of Plastic Strain for DP590 steel alloy. The shape-dependent term in the mention criterion can generalize the application of this criterion in order to predict the behavior of other materials. Plane stress case and the first quarter of the stres...
متن کاملBiomechanics of brain tissue.
The dynamic behavior of porcine brain tissue, obtained from a series of in vitro observations and experiments, is analyzed and described here with the aid of a large strain, nonlinear, viscoelastic constitutive model. Mixed gray and white matter samples excised from the superior cortex were tested in unconfined uniaxial compression within 15h post mortem. The test sequence consisted of three su...
متن کاملUniaxial Tension of a Class of Compressible Solids With Plastic Non-Normality
Motivated by a model that qualitatively captured the response of vertically aligned carbon nanotube (VACNT) pillars in uniaxial compression, we consider the uniaxial tensile response of a class of compressible elastic-viscoplastic solids. In Hutchens et al. [“Analysis of Uniaxial Compression of Vertically Aligned Carbon Nanotubes,” J. Mech. Phys. Solids, 59, pp. 2227–2237 (2011), Erratum 60, 17...
متن کاملInvestigating the Creep Properties of PET-Modified Asphalt Concrete
This study has investigated the creep properties of asphaltic concrete modified with different dosages of waste polyethylene terephthalate (PET) in two different ranges of size. Uniaxial dynamic creep test at 40°C was conducted on the cylindrical specimens of the mixtures. The load was applied in two different frequencies of 0.5 and 5Hz. Creep test results showed that the accumulated strain und...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016