Optical appearance of alpha particle tracks in CR-39 SSNTD

نویسنده

  • K. N. Yu
چکیده

A ray tracing method based on geometrical optics was used to study the tracks from alpha particles with different energies and with an incident angle of 50 . The transmission operation mode of the microscope is simulated. Considering the distribution of light intensities from the tracks, the mean and the 80% percentile gray levels from real experiments are proposed as quantitative variables to differentiate among tracks. The gray level properties for the same track for different exposures can vary to large extents. We introduce three variables, j, k and e, to make empirical corrections. It is interesting to see that these coefficients are very consistent for the same alpha particle track despite the very different gray level properties. Gray level results have been obtained for tracks from alpha particles with 50 incident angle and different incident energies. However, the track depths cannot be predicted by any one of the coefficients j, k and e. Multivariate analyses can help separate the tracks corresponding to different alpha energies. By using discriminant analysis with j, k and e as independents, effectively all alpha energies can be determined with an accuracy of ±0.5 MeV. 2007 Elsevier B.V. All rights reserved.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optical appearance of alpha-particle tracks in CR-39 SSNTDs

The optical appearance of etched alpha-particle tracks in CR-39 SSNTDs under the transmission mode of the optical microscope were studied. The mean grey levels revealed using a digital camera installed on the microscope, together with the major and minor axes were systematically determined for tracks from alpha particles with different incident energies and angles. The grey level properties for...

متن کامل

Proton beam dosimetry by CR-39 track-etched detector

Background: High and intermediate energy protons are not able to form a track in a solid state nuclear track detector (SSNTD) directly. However, such tracks can be formed through secondary particles created during primary radiation nuclear reactions in a SSNTD. Materials and Methods: The protons with primary energies of 9.6 and 30 MeV available at the cyclotron accelerator with corresponding lo...

متن کامل

Simple preparation of thin CR-39 detectors for alpha-particle radiobiological experiments

Alpha-particle radiobiological experiments involve irradiating cells with alpha particles and require accurate positions where the alpha particles hit the cells. In the present work, we prepared thin CR-39 detectors from commercially available CR-39 SSNTDs with a thickness of 100 lm by etching them in 1 N NaOH/ethanol at 40 C to below 20 lm. The desired final thickness was achieved within 8 h. ...

متن کامل

Feasibility studies of colorless LR 115 SSNTD for alpha-particle radiobiological experiments

The feasibility of using the active layer of the colorless LR 115 SSNTD for alpha-particle radiobiological experiments was studied. The track revelation time on the bottom side (the side attached to the polyester base) was much longer than that on the top side (the side not attached to the polyester base) of the active layer so track formation on the top side was more desirable. In relation to ...

متن کامل

Reduction of background in CR-39 SSNTD using chemical pre-etching methods

Presently, CR-39 Solid State Nuclear Track Detectors (SSNTD) is being used for Fast Neutron Personnel Monitoring in India. Individual detectors are cut manually from CR-39 sheets. Laser-cutting of the sheets will ensure precision and also save on the laborious efforts involved in sheet cutting. It was observed that there is a slight increase in background tracks due to laser-cutting. Studies we...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007