On the performance of truss panels with Kagom e cores
نویسندگان
چکیده
The performance characteristics of a truss core sandwich panel design based on the 3D Kagom e has been measured and compared with earlier simulations. Panels have been fabricated by investment casting and tested in compression, shear and bending. The isotropic nature of this core design has been confirmed. The superior performance relative to truss designs based on the tetrahedron has been demonstrated and attributed to the greater resistance to plastic buckling at the equivalent core density. 2003 Published by Elsevier Ltd.
منابع مشابه
Simulated properties of Kagom e and tetragonal truss core panels
The finite element method has been used to simulate the properties of panels with Kagom e and tetragonal cores under compressive and shear loading. The simulation has been performed for two different materials: a Cu-alloy with extensive strain hardening and an Al-alloy with minimal hardening. It is shown that the Kagom e core is more resistant to plastic buckling than the tetragonal core under ...
متن کاملA protocol for characterizing the structural performance of metallic sandwich panels: application to pyramidal truss cores
All-metallic sandwich panels with truss and prismatic cores have impending application as ultra-light load bearing panels amenable to simultaneous active cooling and blast resistance. To facilitate application, a protocol for characterizing the structural performance of such panels is needed that can be used for design calculations. An approach capable of realizing this objective is presented a...
متن کاملFabrication and structural performance of periodic cellular metal sandwich structures
Metallic sandwich panels with periodic, open-cell cores are important new structures, enabled by novel fabrication and topology design tools. Fabrication protocols based on the sheet forming of trusses and shell elements (egg-boxes) as well as textile assembly have allowed the manufacture of robust structures by inexpensive routes. Topology optimization enables control of failure mechanisms at ...
متن کاملCompression and impact testing of two-layer composite pyramidal-core sandwich panels
Quasi-static uniform compression tests and low-velocity concentrated impact tests were conducted to reveal the failure mechanisms and energy absorption capacity of two-layer carbon fiber composite sandwich panels with pyramidal truss cores. Three different volume-fraction cores (i.e., with different relative densities) were fabricated: 1.25%, 1.81%, and 2.27%. Two-layer sandwich panels with ide...
متن کاملShear and bending performance of carbon fiber composite sandwich panels with pyramidal truss cores
Structural performance in direct (pure) shear and three-point bending was investigated for sandwich panels with a carbon fiber pyramidal truss core. Analytical estimates for sandwich panel strength for each loading condition were presented for possible competing failure modes. In the experimental part of the study, pyramidal truss cores were made using the hot press molding technique and then a...
متن کامل