Orthogonal Experiment in Rheocasting-Rolling for Semi-Solid Magnesium Alloy Used by Slope and Mechanical Stirring
نویسندگان
چکیده
The experiment of the rheocasting-rolling for semi-solid magnesium was carried out on the equipment made by ourselves in our laboratory. Semi-solid AZ91D magnesium slurry was prepared by cooling slope and mchanical sirring The evolution of microstructure under different technological parameters were studied. The results show that the technological parameters have great influence on the microstructure of the semi-solid magnesium slurry. The results show that the optimum parameters of slope method were: pouring temperature 630 degrees angle of slope 60° length of slope 0.570m. the optimum parameters of slope method were: stirring rate 500r/min ; holding time 10min; stirring time 15min; casting temperature 560 degrees.
منابع مشابه
Semisolid metal processing
application of shearing during solidification to produce a non-dendritic semisolid slurry that can be Semisolid metal (SSM) processing is a relatively transferred directly into a mould or die to give a final new technology for metal forming. Different from product. Thixoforming is used to describe the near the conventional metal forming technologies which use either solid metals (solid state ne...
متن کاملOptimization of Microstructure and Mechanical Properties of Al-A360 Produced by Semi-Solid Casting
Semi-Solid Casting (SSM) is a new process that could produce globular structures with mechanical properties. The cooling slope method (CLM) is a one of this process that was employed to produce the A360 feedstock. In this method, The dendritic primary phase in the conventionally cast A356 alloy has transformed into a non-dendritic one. In this paper, The molten alloy with the temperature (PT) o...
متن کاملImproving of Microstructure and Mechanical Properties of Al-A356 Alloy with Compo-Casting Method
Aluminum/alumina composites are used in automotive and aerospace industries due to their low density and good mechanical strength. In this research, the effect of mechanical stirring of slurry in liquid-solid phase temperature and injection of alumina powder with inert gas (Ar) on microstructure and mechanical properties of Al-A356 alloy is investigated. In order to improve of the wettability a...
متن کاملINVESTIGATION OF MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF 7075 AL ALLOYPREPARED BY SIMA METHOD
The microstructure and mechanical properties of 7075 wrought aluminum alloy produced by strain induced melt activation (SIMA) route were investigated.Also liquid volume fraction measurement was studied by three procedures. Remelting process was carried out in the range of 560 to 610 °C for 20 min holding. The microstructure in the semi-solid state consists of fine spherical solid grains surroun...
متن کاملNEURAL NETWORK MODELING OF THE EFFECT OF COOLING SLOPE CASTING PARAMETERS ON PARTICLE SIZE OF PRIMARY SILICON CRYSTALS OF SEMISOLID CAST INGOTS OF Al-20Si (wt%)
Abstract: Cooling slope-casting processing is a relatively new technique to produce semisolid cast feedstock for the thixoforming process. Simple equipment, ease of operation, and low processing costs are the main advantages of this process in comparison with existing processes such as mechanical stirring, electromagnetic stirring, etc. The processing parameters of cooling slope casting are...
متن کامل