Controlof LinearMotor MachineTool FeedDrivesfor End Milling : Robust MIMO Approach
نویسندگان
چکیده
In this work, a MIMO H. controller for the linear motor machine tool feed drives has been designed to reduce tracking errors induced by cutting forces for end milling. The controller is designed using normalized coprime factorization method for the dynamic model of the linear motor system including constant in-line and cross coupling force gain, since the feedback cutting force can be considered as the product of the constant gain and the moving velocity of each axis. Analysis of the structured singular value shows that the designed controller has good robust performance despite wide variations of the cutting force and physical parameters. It is directly implemented on a linear motor XY table which is mounted on a milling machine to have cutting experiments via a DSP board. Experimental results verified effectiveness of the proposed scheme to suppress the effects of the cutting force in the high feed rate.
منابع مشابه
Emotional Learning Based Intelligent Controller for MIMO Peripheral Milling Process
During the milling process, one of the most important factors in reducing tool life expectancy and quality of workpiece is the chattering phenomenon due to self-excitation. The milling process is considered as a MIMO strongly coupled nonlinear plant with time delay terms in cutting forces. We stabilize the plant using two independent Emotional Learning-based Intelligent Controller (ELIC) in par...
متن کاملRobust Adaptive Actuator Failure Compensation of MIMO Systems with Unknown State Delays
In this paper, a robust adaptive actuator failure compensation control scheme is proposed for a class of multi input multi output linear systems with unknown time-varying state delay and in the presence of unknown actuator failures and external disturbance. The adaptive controller structure is designed based on the SPR-Lyapunov approach to achieve the control objective under the specific assump...
متن کاملA New Approach for QFT-type Robust Controller Design in Uncertain Multivariable Systems
This paper presents a robust controller design methodology for a class of linear uncertain multivariable systems with hard time-domain constraints on their outputs and control signals in response to step disturbance inputs. In this approach, the m×m MIMO system is replaced by m2 SISO systems and then, using the QFT technique, desirable controllers are synthesized. The final controller will be d...
متن کاملA New Approach for QFT-type Robust Controller Design in Uncertain Multivariable Systems
This paper presents a robust controller design methodology for a class of linear uncertain multivariable systems with hard time-domain constraints on their outputs and control signals in response to step disturbance inputs. In this approach, the m×m MIMO system is replaced by m2 SISO systems and then, using the QFT technique, desirable controllers are synthesized. The final controller will be d...
متن کاملRobust Fuzzy Gain-Scheduled Control of the 3-Phase IPMSM
This article presents a fuzzy robust Mixed - Sensitivity Gain - Scheduled H controller based on the Loop -Shaping methodology for a class of MIMO uncertain nonlinear Time - Varying systems. In order to design this controller, the nonlinear parameter - dependent plant is first modeled as a set of linear subsystems by Takagi and Sugeno’s (T - S) fuzzy approach. Both Loop - Shaping methodology and...
متن کامل