The Role of Plasma Igniters and Fuel Injectors in Hypersonic Technology
ثبت نشده
چکیده
“If someone points out to you that your pet theory of the universe is in disagreement with Maxwell's equations then so much worse for Maxwell's equations. If it is found to be contradicted by observation well, these experimentalists do bungle things sometimes. But if your theory is found to be against the second law of thermodynamics I can give you no hope; there is nothing for it but to collapse in deepest humiliation.”
منابع مشابه
Experimental study of the diesel injector nozzle sediment effect on fuel spray behavior
High pressure amount of fuel in new generation diesel engines’ injector equipped with multiple and small nozzle holes has created significant improvement in the outgoing spray behavior and engine performance. On the other hand, poor fuel quality and injector nozzle embedded in high temperature combustion chamber form fundamental deposits on the nozzle leading to fuel spray inappropriate behavio...
متن کاملNumerical Analysis of Hypersonic Combustion without Cavity Based Injection with Finite Rate Chemistry Model
In this part of the investigation, flow-field properties of hydrogen jets injected into a hypersonic flow are reported. The combustor has a single fuel injection parallel to the main flow from the base. The numerical simulation has been done with finite rate chemistry model using K-ε turbulence model. The results obtained through the numerical simulation of the cavity based fuel injectors are p...
متن کاملComparison of different turbulence models in a high pressure fuel jet
In this study, modeling of a fuel jet which has been injected by high pressure into a low-pressure tank are investigated. Due to the initial conditions and the geometry of this case and similar cases (like CNG injectors in internal combustion engines (ICE)), the barrel shocks and Mach disk are observed. Hence a turbulence and transient flow will be expected with lots of shocks and waves. Accord...
متن کاملThe Effect of Cylinder Deactivation on the Performance Parameters of a Bi-fuel Engine
To meet consumer and legislation requirements, various technologies have been used worldwide to achieve optimal fuel consumption and to reduce greenhouse gas emissions. One of the proposed technologies is cylinder deactivation using various methods, including, injectors cutting off, closing the intake and exhaust valves and crankshaft decoupling. In this paper, a GT-Power model is created to in...
متن کاملApproximate Performance of PeriodicHypersonic Cruise Trajectories for Global ReachPreston
This paper develops the analytical framework to compare the approximate performance of periodic hypersonic cruise trajectories with previously proposed hypersonic trajectory prooles for global reach. Speciically, range, V and payload carrying capacity are evaluated for various trajectory types to illustrate the enhanced performance achieved by y-ing periodic hypersonic cruise trajectories with ...
متن کامل