Power scaling of Raman fiber lasers
نویسندگان
چکیده
Raman fiber laser is an efficient way to expand the spectral coverage of fiber lasers. In recent years, output power of Raman fiber laser has been scaled quickly. There is a great potential in further power scaling, technical innovations, and scientific applications. An integrated ytterbium-Raman fiber amplifier architecture was proposed, which allows power scaling of Raman fiber laser to over kilowatt and more. Hundred watt level single frequency Raman fiber amplifier was achieved, which allows the generation of high power sodium guide star laser. New scheme of cladding pumped Raman fiber laser is studied in order to improve the brightness enhancement. Furthermore, possible application in spectral beam combing is discussed.
منابع مشابه
Simultaneous Raman based power combining and wavelength conversion of high-power fiber lasers.
We present a technique for simultaneous power-combining and wavelength-conversion of multiple fiber lasers into a single, longer wavelength in a different band through Raman-based, nonlinear power combining. We illustrate this by power combining of two independent Ytterbium lasers into a single wavelength around 1.5micron with high output powers of upto 99W. A high conversion efficiency of ~64%...
متن کاملHigh-Power Continuous-Wave Directly-Diode-Pumped Fiber Raman Lasers
We describe novel fiber Raman lasers pumped directly by spectrally combined high power multimode laser diodes at ∼975 nm and emitting at ∼1019 nm. With a commercial multimode graded-index fiber, we reached 20 W of laser output power with a record slope efficiency of 80%. With an in-house double-clad fiber, the beam quality improved to M = 1.9, albeit with lower output power and slope efficiency...
متن کاملRaman Amplification And Pulsed Lasing In Cladding-Pumped Germanosilicate Fiber
Introduction: Cladding-pumped rare-earth-doped fibers and Raman fiber devices have been two of the most compelling advances in the area of fiber amplifiers and lasers in recent years. Both cladding-pumped fibers and Raman fiber devices are primarily high-power devices. Cladding-pumping enables pumping with multi-mode pump sources that deliver high-power at a low cost. The core of the double-cla...
متن کاملStability analysis of second order pulsed Raman laser in dispersion managed systems
Wavelength tunable synchronous pulse sources are highly desirable for spectroscopy and optical diagnostics. The common method to generate short pulses in the fiber is the use of nonlinear induced spectral broadening which result in soliton shaping in anomalous dispersion regime. However, to generate ultra-short pulses, broadband gain mechanism is also required. In recent years, Raman fiber lase...
متن کاملBOTDA sensor with 2-m spatial resolution over 120 km distance using bi-directional distributed Raman amplification
In this paper we propose the use of optimized bi-directional distributed Raman amplification to enhance the operating range of Brillouin optical time-domain analysis (BOTDA) sensors. In particular by combining high-power fiber-Raman lasers and polarization-multiplexed Fabry-Pérot lasers operating at 1450 nm with low relative-intensity-noise (RIN), we demonstrate distributed sensing (using first...
متن کامل