The Next Four Orders of Magnitude in Performance for Parallel CFD
نویسنده
چکیده
While some simulations whose computational work requirements are superlinear in memory requirements have executed at 1 Teraflop/s, simulations of PDE-based systems remain “mired” in the hundreds of Gigaflop/s on the same machines. We briefly review the algorithmic structure of typical PDE-based CFD codes that is responsible for this situation and consider possible architectural and algorithmic sources for performance improvement towards the achievement of the remaining four orders of magnitude required to reach 1 Petaflop/s.
منابع مشابه
Parallel computation framework for optimizing trailer routes in bulk transportation
We consider a rich tanker trailer routing problem with stochastic transit times for chemicals and liquid bulk orders. A typical route of the tanker trailer comprises of sourcing a cleaned and prepped trailer from a pre-wash location, pickup and delivery of chemical orders, cleaning the tanker trailer at a post-wash location after order delivery and prepping for the next order. Unlike traditiona...
متن کاملPV3 at the Princeton CFD Laboratory
The scientific activity in the CFD laboratory in the Department of Mechanical and Aerospace Engineering at Princeton is centered on the development of advanced computational simulation techniques in the aerodynamic design of modern aircraft, and the prediction hydrodynamic performance of ships. Computer codes based on on both structured body-fitted meshes and unstructured tetrahedral meshes hav...
متن کاملتحلیل و بهبود جریان حالت خاموش نانو ماسفت کرنشی دومحوره سیلیکانی نوع p با کنترل چگالی ناخالصی زیرلایه مجازی
In biaxially strained p-MOSFET with Si channel, formation of a parasitic parallel channel due to misalignment of energy bands degrades device performance by increasing off-state current. In this paper a new approach has been introduced to eliminate this parasitic channel by increasing the dopant concentration of virtual substrate up to . Using simulation the impact of this method on the parasit...
متن کاملPerformance Evaluation of Nanofluid (Al2O3/H2O-C2H6O2) Based Parabolic Solar Collector Using Both Experimental and CFD Techniques
The present work evaluates the performance of solar collector using Al2O3-C2H6O2-H2O nanofluid as a working fluid through both experimental and CFD analysis. Ethylene-glycol water mixture (40:60 v/v) is used as base fluid, where α-Al2O3 nanoparticle of 20 nm average size is dispersed for the preparation of nanofluid of four different volumetric concentration (vol. conc.) of 0.05, 0.075, 0.1 and...
متن کاملComparison the performance of different reverse osmosis membrane modules by CFD modeling
Reverse osmosis is a commonly used process in water desalination. Due to the scarcity of freshwater resources and wastewater problems, a lot of theory and experimental studies have been conducted to optimize this process. In the present study, the performance of reverse osmosis membrane module of salt–water separation was simulated based on computational fluid dynamics technique and solution-di...
متن کامل