Computational fluid dynamic prediction of the residence time distribution of a prototype hydrodynamic vortex separator operating with a base flow component
نویسنده
چکیده
A hydrodynamic vortex separator (HDVS) has been modelled using computational fluid dynamics (CFD) in order to accurately determine the residence time of the fluid at the two outlets of the HDVS using a technique that was developed for use in heating, ventilation, and air conditioning (HVAC). The results have been compared with experimental data [1]. It is shown that, in using CFD, it is possible to study the response to a variety of inputs, and also to determine the mean residence time of the fluid within the separator. Although the technique used for determining the residence time was developed for use in HVAC, it is shown here to be applicable for the analysis of hydraulic systems, specifically, wastewater treatment systems.
منابع مشابه
Combined application of computational fluid dynamics (CFD) and design of experiments (DOE) to hydrodynamic simulation of a coal classifier
Combining the computational fluid dynamics (CFD) and the design of experiments (DOE) methods, as a mixed approach in modeling was proposed so that to simultaneously benefit from the advantages of both modeling methods. The presented method was validated using a coal hydraulic classifier in an industrial scale. Effects of operating parameters including feed flow rate, solid content and baffle le...
متن کاملFlow Variables Prediction Using Experimental, Computational Fluid Dynamic and Artificial Neural Network Models in a Sharp Bend
Bend existence induces changes in the flow pattern, velocity profiles and water surface. In the present study, based on experimental data, first three-dimensional computational fluid dynamic (CFD) model is simulated by using Fluent two-phase (water + air) as the free surface and the volume of fluid method, to predict the two significant variables (velocity and channel bed pressure) in 90º sharp...
متن کاملNumerical Simulation of Fluid Flow Past a Square Cylinder Using a Lattice Boltzmann Method
The method of lattice boltzmann equation(LBE) is a kinetic-based approach for fluid flow computations. In the last decade, minimal kinetic models, and primarily the LBE, have met with significant success in the simulation of complex hydrodynamic phenomena, ranging from slow flows in grossly irregular geometries to fully developed turbulence, to flow with dynamic phase transitions. In the presen...
متن کاملA New Mathematical Model for the Prediction of Internal Recirculation in Impinging Streams Reactors
A mathematical model for the prediction of internal recirculation of complex impinging stream reactors has been presented. The model constitutes a repetition of a series of ideal plug flow reactors and CSTR reactors with recirculation. The simplicity of the repeating motif allows for the derivation of an algebraic relation of the whole system using the Laplace transform. An impinging stream...
متن کاملAdmission Effects on the Flow Behaviour of a Double Entry Turbocharger Turbine
Dual turbocharger turbine is fed by an unequal out-of-phase mass flow charge almost all the time which have significant effects on its performance parameters and flow phenomena which are not well known. Besides fully understanding the flow behavior in the radial turbine suffers from lack of detailed information about the secondary flows. This article studies the secondary flow structure within ...
متن کامل