Laser printed nano-gratings: orientation and period peculiarities
نویسندگان
چکیده
Understanding of material behaviour at nanoscale under intense laser excitation is becoming critical for future application of nanotechnologies. Nanograting formation by linearly polarised ultra-short laser pulses has been studied systematically in fused silica for various pulse energies at 3D laser printing/writing conditions, typically used for the industrial fabrication of optical elements. The period of the nanogratings revealed a dependence on the orientation of the scanning direction. A tilt of the nanograting wave vector at a fixed laser polarisation was also observed. The mechanism responsible for this peculiar dependency of several features of the nanogratings on the writing direction is qualitatively explained by considering the heat transport flux in the presence of a linearly polarised electric field, rather than by temporal and spatial chirp of the laser beam. The confirmed vectorial nature of the light-matter interaction opens new control of material processing with nanoscale precision.
منابع مشابه
Flying phase mask for the printing of long submicron-period stitchingless gratings
Long and stitchingless gratings are printed by means of a read/write head comprising a phase mask illuminated by an intensity modulated laser beam and a reference grating displacement sensor which dictates the modulation period real time. A nearly perfect grating copying is achieved by fixing the sensor grating scale and the written grating substrate on a long platform sliding under the read/wr...
متن کاملToward nano- and microprocessing in glass with femtosecond laser pulses
In this paper, we report on the refractive index changes and vacancies that are induced in silica glass by the irradiation of ultrashort laser pulses. We fabricated waveguides, couplers, and gratings by the filamentation of femtosecond laser pulses. We demonstrate the formation and the movement of sub-micrometer or nanometer vacancies, called voids. We show the formation of three-dimensional sh...
متن کاملFemtosecond versus picosecond laser machining of nano-gratings and micro-channels in silica glass.
The ability of 8 picosecond pulse lasers for three dimensional direct-writing in the bulk of transparent dielectrics is assessed through a comparative study with a femtosecond laser delivering 600 fs pulses. The comparison addresses two main applications: the fabrication of birefringent optical elements and two-step machining by laser exposure and post-processing by chemical etching. Formation ...
متن کاملOptical Fibre Long-Period Gratings Functionalised with Nano-Assembled Thin Films: Approaches to Chemical Sensing
© 2013 Lee et al., licensee InTech. This is an open access chapter distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Optical Fibre Long-Period Gratings Functionalised with Nano-Assembled Thin Films: Approa...
متن کاملSelf-formation of sub-60-nm half-pitch gratings with large areas through fracturing.
Periodic micro- and nanostructures (gratings) have many significant applications in electronic, optical, magnetic, chemical and biological devices and materials. Traditional methods for fabricating gratings by writing with electrons, ions or a mechanical tip are limited to very small areas and suffer from extremely low throughput. Interference lithography can achieve relatively large fabricatio...
متن کامل