Multi-interface Level Sensors and New Development in Monitoring and Control of Oil Separators

نویسندگان

  • Syed Faisal Ahmed Bukhari
  • Wuqiang Yang
چکیده

In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, water and other components. Because of the unavailability of suitable multi-interface level measurement systems, oil separators are currently operated by the trial-and-error approach. In this paper some conventional techniques, which have been used for level measurement in industry, and new development are discussed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Development of a new low-cost procedure for wind farm maintenance with a view to decrease soil pollution

The purpose of this article is to present the development of a wind farm, with a condition monitoring system (CMS) based on control charts as the algorithm, centred on a new index, to prevent soil pollution by oil spills in wind farms. To this end, temperature sensors can be considered as one of the more significant sensors to be employed in this study, because the information obtained with reg...

متن کامل

Development of a new low-cost procedure for wind farm maintenance with a view to decrease soil pollution

The purpose of this article is to present the development of a wind farm, with a condition monitoring system (CMS) based on control charts as the algorithm, centred on a new index, to prevent soil pollution by oil spills in wind farms. To this end, temperature sensors can be considered as one of the more significant sensors to be employed in this study, because the information obtained with reg...

متن کامل

A Novel Approach to Obtaining the Optimum Pressure and Stages of Separators

Nowadays, the increasing demand for energy in the world is one of the main concerns for energy supply. In fact, the required energy can be obtained by increasing the production rate of fossil fuels such as oil and natural gas. However, improving the efficiency of the equipment and facilities might have a significant impact on production from hydrocarbon resources. With respect to this subject, ...

متن کامل

Optimization of Online induction Sensor for Ferrous Metals Particles Identification in Engine Oil

Engine oil is one of most important parameters in internal combustion engine that plays effective role in component wear. One of the ways to optimize the performance of the IC engines is online monitoring of wear particle in engine oil. There are different ways to identifying these particles, most of which are offline. Nowadays online oil monitoring sensors are quickly developed. In this study ...

متن کامل

Modeling and Hybrid Pareto Optimization of Cyclone Separators Using Group Method of Data Handling (GMDH) and Particle Swarm Optimization (PSO)

In present study, a three-step multi-objective optimization algorithm of cyclone separators is catered for the design objectives. First, the pressure drop (Dp) and collection efficiency (h) in a set of cyclone separators are numerically evaluated. Secondly, two meta models based on the evolved Group Method of Data Handling (GMDH) type neural networks are regarded to model the Dp and h as the re...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2006