Bearing Run-To-Failure Data Simulation for Condition Based Maintenance
نویسندگان
چکیده
This paper presents a bearing run-to-failure data simulation model for condition based maintenance, in which a single point outrace fault can be implemented. According to the characteristic that bearings life follows the Weibull distribution, amount of bearing run-to-failure datasets can be simulated which can be used to verify the feature extraction, remaining useful life prediction and maintenance decision methods particularly the methods which use Proportional hazard model. A case study simulating 6205-2RS JEM SKF bearing run-to-failure data is done detailed.
منابع مشابه
A new approach for constraining failure probability of a critical deteriorating system Yard crane scheduling in port container terminals using genetic algorithm
In this paper, we focus on a continuously deteriorating critical equipment which its failure cannot be measured by cost criterion. For these types of systems like military systems, nuclear systems, etc it is extremely important to avoid failure during the actual operation of the system. In this paper we propose an approach which constrains failure probability to a pre-specified value. This valu...
متن کاملMaintainability Policy for Deteriorating System with Inspection and Common Cause Failure (TECHNICAL NOTE)
A condition based preventive and corrective maintenance policy is proposed for a continuously operating system. The condition of the system is assumed to deteriorate with time. The model incorporates both deterioration as well as random common cause failures. The deterioration stages are modeled as discrete state processes. The system is put to random inspection to know the condition. The mean ...
متن کاملCondition Based Maintenance for Two-Component Systems with Reliability and Cost Considerations
This paper studies a maintenance policy for a system composed of two components, which are subject to continuous deterioration and consequently stochastic failure. The failure of each component results in the failure of the system. The components are inspected periodically and their deterioration degrees are monitored. The components can be maintained using different maintenance actions (repair...
متن کاملA multi-stage stochastic programming for condition-based maintenance with proportional hazards model
Condition-Based Maintenance (CBM) optimization using Proportional Hazards Model (PHM) is a kind of maintenance optimization problem in which inspections of a system relevant to its failure rate depending on the age and value of covariates are performed in time intervals. The general approach for constructing a CBM based on PHM for a system is to minimize a long run average cost per unit of time...
متن کاملBearing Condition Prediction Using Enhanced Online Learning Fuzzy Neural Networks
Machine health condition (MHC) prediction is useful for preventing unexpected failures and minimizing overall maintenance costs since it provides decision-making information for condition-based maintenance (CBM). This paper presents a novel bearing health condition prediction approach based on enhanced online sequential learning fuzzy neural networks (EOSL-FNNs). Based on extreme learning machi...
متن کامل