New surface modification of titanium implant with phospho-amino acid.

نویسندگان

  • Yasuhiko Abe
  • Kyou Hiasa
  • Maho Takeuchi
  • Yasuhiro Yoshida
  • Kazuomi Suzuki
  • Yasumasa Akagawa
چکیده

The purpose of this study was to investigate a new biochemical surface modification technique for titanium implants using phospho-amino acid. Pure titanium disks were pretreated with 10 N HCl and ultrapure water at room temperature for 30 minutes respectively. Then these disks were modified with either L-threonine (Thr) or O-phospho-L-threonine (P-Thr) at 37 degrees C for 12 hours. X-ray photoelectron spectroscopy (XPS) chemically analyzed the modified surfaces. It was revealed that the N 1s peak which originated from Thr was not detected in the wide-scan spectrum of Thr-modified surface, whereas three peaks of N 1s, P 2s, and P 2p which originated from P-Thr were detected in the wide-scan spectrum of P-Thr-modified surface. Moreover, the P 2p peak of P-Thr which reacted with the surface significantly shifted to a lower binding energy (p < 0.05). Based on the results of this study, it was concluded that P-Thr chemically bonded to the titanium surface treated with HCl.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

رفتار سلول استخوان ساز MG-63 بر روی سطح تیتانیم اصلاح شده با محلول اسیدی

The osseointegration of oral implants is related to the early interactions between osteoblastic cells and titanium surface. Chemical surface modification of titanium (Ti) implants is used to improve peri-implant bone growth, bone-to-implant contact, and adhesion strength. Thus, in this study, the surface topography, chemistry, and biocompatibility of polished titanium surface treated with mixe...

متن کامل

Chemical interaction between titanium implant surface and amino acids.

The purpose of this study was to investigate the chemical interaction between titanium implant surface and amino acids. Pure titanium disks were pretreated with 10 N HCl and ultrapure water at room temperature for 30 minutes each. Disks were then modified with one of the three amino acids--L-aspartic acid, L-serine, or L-threonine--at 37 degrees C for 12 hours. Modification with oxalic acid was...

متن کامل

Enhanced Osseointegration of a Modified Titanium Implant with Bound Phospho-Threonine: A Preliminary In Vivo Study

Implant surface topography is a key factor in achieving osseointegration. l-Threonine can be chemically and stably bonded to titanium surfaces by phosphorylation. This study investigated the degree of in vivo osseointegration of an implant with a novel o-phospho-l-threonine (p-Thr)-binding surface. MC3T3-E1 cells were seeded on the p-Thr binding surface and machined surface disks, and initial c...

متن کامل

Ion-Doped Silicate Bioceramic Coating of Ti-Based Implant

Titanium and its alloy are known as important load-bearing biomaterials. The major drawbacks of these metals are fibrous formation and low corrosion rate after implantation. The surface modification of biomedical implants through various methods such as plasma spray improves their osseointegration and clinical lifetime. Different materials have been already used as coatings on biomedical implan...

متن کامل

Advancing dental implant surface technology--from micron- to nanotopography.

Current trends in clinical dental implant therapy include use of endosseous dental implant surfaces embellished with nanoscale topographies. The goal of this review is to consider the role of nanoscale topographic modification of titanium substrates for the purpose of improving osseointegration. Nanotechnology offers engineers and biologists new ways of interacting with relevant biological proc...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Dental materials journal

دوره 24 4  شماره 

صفحات  -

تاریخ انتشار 2005