An Explicit Crosstalk Aware Delay Modelling For On-Chip RLC Interconnect for Ramp Input with Skin Effect

نویسندگان

  • Shilpi Lavania
  • Vikas Maheshwari
چکیده

With the increase in frequency towards the giga hertz range, the analysis of high frequency effects like skin effect etc. are becoming extensively predominant and important for high speed VLSI design. Skin effect attenuates the high frequency components of a signal more than that of the low frequency components. Noise produced in any interconnect segment may degrade the performance of the entire system. Hence accurate noise and delay modelling for RLC lines is critical for timing and system integrity analysis. Skin effect alters the values of the resistance and also the inductance, which in turn affects the system integrity in particular and its response as a whole. Till now the skin effect has been neglected for modelling the on-chip interconnects. But at high frequencies of the order of gigahertz the skin effect becomes dominant factor and needs to be considered for accurate performance analysis. In this paper, we have proposed an accurate modelling of crosstalk voltage and delay response including skin effect for ramp input in on-chip VLSI RLC interconnect. The voltage response at the output node is analysed. From the response, the crosstalk noise and delay is estimated analytically for the on-chip RLC interconnect. This paper also addresses a novel analytical model to find the impact of skin effect on the noise and delay variation in RLC interconnect, without considering the skin effect modelling in inductance under ramp input. In the proposed work the resistance variation due to the skin effect is considered in a two wire transmission line model. The correlation between the skin effect and noise is also considered. KeywordsVLSI , RLC line, Interconnects, Crosstalk, Noise, Delay

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analytical Crosstalk Modelling of On-Chip RLC Global Interconnects with Skin Effect for Ramp Input

This paper proposes a much improved, accurate, fast and simple crosstalk model for coupled interconnect line considering the skin effect. It is time for VLSI designers to examine the crosstalk noise effects in their designs, so that they are free from noise. Hence, accurate noise modelling for RLC lines is critical for timing and system integrity analysis. Skin effect alters the values of the r...

متن کامل

Coupling Aware Explicit Delay Metric for On- Chip RLC Interconnect for Ramp input

Recent years have seen significant research in finding closed form expressions for the delay of the RLC interconnect which improves upon the Elmore delay model. However, several of these formulae assume a step excitation. But in practice, the input waveform does have a non zero time of flight. There are few works reported so far which do consider the ramp inputs but lacks in the explicit nature...

متن کامل

Mathematical Modeling of Bandwidth and Power in High Speed Vlsi Rlc Interconnect with Skin Effect

As the interconnect technology is shrinking into nanometres regime the bandwidth of long interconnects reduces. Hence an accurate modelling of bandwidth is essential for the estimation of performance of VLSI interconnects. With the increase in frequency towards the giga hertz range, the analysis of high frequency effects like skin effect etc. are becoming extensively predominant and important f...

متن کامل

Modelling of Crosstalk and Delay for Distributed RLCG On-Chip Interconnects For Ramp Input

-In order to accurately model high frequency affects, inductance has been taken into consideration. No longer can interconnects be treated as mere delays or lumped RC networks. In that frequency range, the most accurate simulation model for on-chip VLSI interconnects is the distributed RLC model. Unfortunately, this model has many limitations at much higher of operating frequency used in today’...

متن کامل

Accurate Crosstalk Analysis for RLC On-Chip VLSI Interconnect

This work proposes an accurate crosstalk noise estimation method in the presence of multiple RLC lines for the use in design automation tools. This method correctly models the loading effects of non switching aggressors and aggressor tree branches using resistive shielding effect and realistic exponential input waveforms. Noise peak and width expressions have been derived. The results obtained ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011