Vibration Monitoring for Electrical Equipment Faults Detection Using Fast Fourier Transform
نویسندگان
چکیده
This paper describes vibration diagnosis based on electric faults. These faults could appear in electrical equipment in general, but this paper focuses on the case of transformer, induction and dc motor. In order to do the diagnosis there are analysed vibration signals from the piezoelectric accelerometer. This accelerometer is installed on the frame of the equipment. The signals acquired are applied the Fast Fourier Transform. The level of the fault frequencies in the vibration spectrum is higher than the level of other frequencies. Key-Words: transformer fault diagnosis, dc motor, induction motor, Fast Fourier Transform
منابع مشابه
Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal
The aim of this work is the application of the phase variation in vibration signal for fault detection on rotating machines. The vibration signal from the machine is modulated in amplitude and phase around a carrier frequency. The modulating signal in phase is determined after the Hilbert transform and is used, with the Fast Fourier Transform, to extract the harmonics spectrum in phase. This me...
متن کاملBearing Fault Detection in Induction Motor Using Fast Fourier Transform
ABSTACT: In the present scenario every industry need Condition Based Monitoring System to avoid unwanted faults in the process components. Vibration condition monitoring technique is widely used for fault detection. Vibration monitoring is the most reliable method of assessing the overall health of a motor system. In this paper we work on 2 Hp inductions motor. Ball bearing fault is widely occu...
متن کاملCondition monitoring methods, failure identification and analysis for Induction machines
Induction motors are a critical component of many industrial processes and are frequently integrated in commercially available equipment and industrial processes. The studies of induction motor behavior during abnormal conditions, and the possibility to diagnose different types of faults have been a challenging topic for many electrical machine researchers. The Motor Current Signature Analysis ...
متن کاملA Review of Application of Signal Processing Techniques for Fault Diagnosis of Induction Motors – Part I
Abstract - Use of efficient signal processing tools (SPTs) to extract proper indices for fault detection in induction motors (IMs) is the essential part of any fault recognition procedure. The Part1 of the two parts paper focuses on Fourier-based techniques including fast Fourier transform and short time Fourier transform. In this paper, all utilized SPTs which have been employed for fault fete...
متن کاملGear and Bearing Fault Detection Using Wavelet Packet and Hilbert Method via Acoustic Signals
Detection of gearing and bearing faults using vibration signals has been widely used for decades. A lot of methods of vibration signal processing for fault detection have been used, such as fast Fourier transform, Hilbert transform, wavelet and wavelet packet transform. In recent years, a new method for vibration signal processing, combining Hilbert transform and wavelet packet appeared, and ha...
متن کامل