Twisted Pair FDDI Magnetics Overview and Recommendations

ثبت نشده
چکیده

The use of twisted pair cable for high speed LAN signalling necessitates the inclusion of transmit and receive magnetics to couple the transmission signal to and from the copper media. The choice of magnetics in a given implementation can have a significant effect on the integrity of the transmission signal. Several important factors must be considered when choosing the magnetics for FDDI twisted pair PMDs. This application note discusses key performance parameters of magnetics suitable for use within a PMD designed for ANSI X3T9.5 FDDI Twisted Pair Draft Proposal compliance. Although magnetics are required for both shielded and unshielded twisted pair media, this note focuses specifically on magnetics suitable for FDDI signalling over Category 5 Unshielded Twisted Pair. This note includes layout recommendations for a typical PMD transceiver implementation employing the National Semiconductor DP83223 TWISTER transceiver and suggests the use of some readily available magnetics.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

New Pseudoternary Line Code For High Speed Twisted Pair Data Links

Regulated Mark Inversion (RMI) is a new pseudoternary line code which minimizes high frequency spectral components in a similar way to the FDDI TP-PMD MLT3 code, and yet also has bounded running digital sum. The code has significantly lower d.c. content than standard MLT3, and lower high frequency content than run-length limited MLT3 codes. As the speed of data transmission on twisted pair cabl...

متن کامل

The Aps Control System Network Upgrade*

When it was installed, the Advanced Photon Source (APS) control system network was at the state-of-the-art. Different aspects of the system have been reported at previous meetings [1,2]. As loads on the controls network have increased due to newer and faster workstations and front-end computers, we have found performance of the system declining and have implemented an upgraded network. There ha...

متن کامل

An Overview of the Common Node Software

to transfer information To address an aggressive across the network. fiber distributed data The Common Node Software interface (FDDI) program (CNS) implements the part schedule and reduce of the FDDI station that the complexity of the controls and monitors concurrent development of connections within the FDDI multiple FDDI products, network. To provide this Digital developed a service, CNS impl...

متن کامل

Fiber Distributed Data Interface Overview

As the use of local area After exploring various networks (LANs) continues alternatives to secondto grow at an exponential generation local area rate, many large networks networks (LANs), with Ethernet backbones Digital selected the are reaching their usable fiber distributed data capacity. In addition, interface (FDDI) system. the explosion in the FDDI implements the use of high-performance In...

متن کامل

Q.931 Call Control Implementation on an ISDN/FDDI-II Interworking Scenario

This paper focuses on the Call Control for the establishment and release of isochronous calls within the DAMS network (ESPRIT project #2146), a distributed ISDN PBX over an FDDI-II backbone optical ring that supports both isochronous and asynchronous traffic generated by ISDN terminals, LAN terminals, and Bandwidth On Demand (BOD) terminals. After a general overview of the DAMS network architec...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1995