Ionization‐enhanced diffusion: Ion implantation in semiconductors
نویسندگان
چکیده
منابع مشابه
LOW-ENERGY-ION ENHANCED DIFFUSION AT THE SURFACE OF METALS
Radiation enhanced diffusion at the surface of metals has been observed and studied for low-energy nitrogen ions at the surface of copper. The displacement of the target atoms during irradiation creates vacancies and other defects near the surface, thus enhancing the diffusion of implanted materials toward the surface and also into the solid. The mechanism has been studied here by a specia...
متن کاملTransient-Enhanced Diffusion in Shallow-Junction Formation
Current methods for forming junctions in the source and drain regions of complementary metaloxide semiconductor (CMOS) transistor circuits use low-energy ion implantation and rapid thermal annealing (RTA). Spike annealing, with fast ramping and short dwell time at maximum temperature, has been shown to be advantageous for shallow-junction formation. Diffusion and electrical activation of implan...
متن کاملMg–Ga liquid metal ion source for implantation doping of GaN
A magnesium liquid metal ion source was investigated for p-type doping of GaN. The metal is an alloy composed of 33.3% Mg and 66.7% Ga. The source type is a direct heating needle source with a spring-type reservoir, which is constructed using tungsten wire and a ceramic tube. The source has been tested and characterized in a NanoFab 150 focused ion beam ~FIB! system. A typical source lifetime w...
متن کاملA Simplified Picture for Transient Enhanced Diffusion of Boron in Silicon
In recent years, transistor junction formation in complementary metal oxide semiconductor devices by ion implantation has encountered serious limitations due to transient enhanced diffusion ~TED! during the annealing step. Current models of TED rely heavily on detailed simulations of the complex diffusion-reaction network that governs TED, and often rely on fitted parameters whose values are un...
متن کاملInfluence of Ni Deposition and Subsequent N+ Ion Implantation at Different Implantation Energies on Nano-Structure and Corrosion Behavior of 316 Stainless Steels
Nickel films of 300 nm thickness were deposited by electron beam evaporation at room temperature on 316 stainless steels. Corrosion studies of Ni coated 316 SS have been performed after N+ ion implantation at different energies of 20, 40, 60 and 80 keV. The structure and surface morphology of the films were evaluated using X-ray diffraction (XRD), atomic force microscope (AFM) an...
متن کامل