Graphene Oxide in Lossy Mode Resonance-Based Optical Fiber Sensors for Ethanol Detection
نویسندگان
چکیده
The influence of graphene oxide (GO) over the features of an optical fiber ethanol sensor based on lossy mode resonances (LMR) has been studied in this work. Four different sensors were built with this aim, each comprising a multimode optical fiber core fragment coated with a SnO₂ thin film. Layer by layer (LbL) coatings made of 1, 2 and 4 bilayers of polyethyleneimine (PEI) and graphene oxide were deposited onto three of these devices and their behavior as aqueous ethanol sensors was characterized and compared with the sensor without GO. The sensors with GO showed much better performance with a maximum sensitivity enhancement of 176% with respect to the sensor without GO. To our knowledge, this is the first time that GO has been used to make an optical fiber sensor based on LMR.
منابع مشابه
Optical Fiber Humidity Sensor Based on Lossy Mode Resonances
A novel optical fiber humidity sensor based on lossy mode resonances (LMR) has been developed. LMRs are supported here by a thin Indium Tin Oxide (ITO) coating fabricated onto an optical fiber core via a sol-gel dip coating. ITO coated optical fiber devices present a resonant maximum absorption peak in the infra-red region which is shifted to higher wavelengths when the refractive index of the ...
متن کاملNoise Equivalent Power Optimization of Graphene- Superconductor Optical Sensors in the Current Bias Mode
In this paper, the noise equivalent power (NEP) of an optical sensor based ongraphene-superconductor junctions in the constant current mode of operation has beencalculated. Furthermore, the necessary investigations to optimize the device noise withrespect to various parameters such as the operating temperature, magnetic field, deviceresistance, voltage and current bias have been presented. By s...
متن کاملApplication of Graphene and Graphene Oxide for modification of electrochemical sensors and biosensors: A review
This paper gives a comprehensive review about the most recent progress in graphene and graphene oxide based electrochemical sensors and biosensors. Graphene, emerging as a true 2-dimensional material, has received increasing attention due to its unique physicochemical properties (high surface area, excellent conductivity, high mechanical strength, and ease of functionalization and mass product...
متن کاملApplication of Graphene and Graphene Oxide for modification of electrochemical sensors and biosensors: A review
This paper gives a comprehensive review about the most recent progress in graphene and graphene oxide based electrochemical sensors and biosensors. Graphene, emerging as a true 2-dimensional material, has received increasing attention due to its unique physicochemical properties (high surface area, excellent conductivity, high mechanical strength, and ease of functionalization and mass product...
متن کاملReduced Graphene Oxide nano-composites layer on fiber optic tip sensor reflectance response for sensing of aqueous ethanol
In this study, the used of tapered optical fiber tip as sensors coated with reduced Graphene Oxide (rGO) is investigated. The resultant rGO nanocomposites coated on the tapered fiber sensor were characterized by X-ray Diffraction (XRD), Raman spectroscopy, and field emission scanning electron microscopy (FESEM). Optimization of the rGO layer and the tapering parameters are found and the sensing...
متن کامل